Airsoft AKs

JG AK47 with Real Wood and full stock 

As with all China brand guns please check for Site limits while we try to provide 350 fps or below some may need to be downgraded by the retailer.

Major features

• Equipped with shoot & recoil engine By pulling the trigger, the bolt operates at the same time as firing, and the strong recoil generated inside the main body is transmitted to the whole body. In addition, an auto stop system is used to stop the firing operation when the magazine is empty. It is a model that pursues the reality of operation and operability.

• Bolt release mechanism Equipped with a bolt release mechanism that releases the auto stop by pulling the bolt handle. You can enjoy realistic operation procedures.

• Uses metal parts Die-casting and pressed steel are used for the parts of each part, including the lower receiver, to create a profound feeling that moves to the eyes and a feeling of weight when picked up, and also achieves high rigidity. The lower receiver has a deflick coat to reproduce the texture of the steel black dyeing process.

• M-LOK rail system The latest rail system "M-LOK" is used on both sides of the hand guard with underrail. The hand guard, which allows you to add rails only where you need it, is slim and easy to handle, and has been lightened by lightening. The 20mm wide (Picatinny standard) M-LOK rail comes with 3 types of 3 slots, 5 slots, and 7 slots. It can be easily attached and detached with the included hexagon wrench.

• Various accessory parts It comes with two types of M-LOK covers, two types of hand stops that support the hand holding the hand guard, and a dedicated mount that allows you to attach the separately sold "Micro Prosite" at a lower position.

• Compatible with various muzzle options If you remove the flash hider of the muzzle, you can install a muffler option with 14 mm reverse screw specifications such as a silencer.

• Steel press magazine Comes with a magazine that has 90 bullets and uses a steel press outer case similar to the real one. Equipped with a built-in follower stopper, it is also possible to enjoy only the firing operation without putting a BB bullet in the magazine. * The magazine is not compatible with the AK74 magazine.

• Magazine adapter included By attaching an adapter to the main body, you can use the magazine for electric gun standard type AK. * When the adapter is attached, the auto stop system and bolt release mechanism will not operate. In addition, the magazine for the next-generation electric gun AK47 cannot be used.

• Achieves intense blowback Equipped with an AK-specific blowback engine that uses a large piston with a diameter of approximately 19mm. The bolt also operates in conjunction with the firing, allowing you to enjoy the intense recoil shock.

• realistic operation It faithfully reproduces the functions similar to the real thing, such as loading the first bullet by operating the bolt handle and stopping the bolt from advancing when it runs out of bullets.

• short barrel custom The easy-to-handle 8.7-inch barrel and original design 3-port muzzle brake are machined from aluminum. In addition, by removing the muzzle brake, it is possible to install muzzle options with 14mm reverse thread specifications such as a silencer.

• M-LOK rail system The latest rail system "M-LOK" is adopted for the highly rigid aluminum cutting hand guard. The lower hand guard allows you to add rails only where needed, and has a slim and easy-to-handle design. M-LOK rails with a width of 20 mm (Picatinny standard) come with one each of three types: 3 slots, 5 slots, and 7 slots. It can be easily attached and detached using the included hex wrench.

• Upper rail standard equipment Equipped with a mount rail with a width of 20mm (Picatinny standard) from the top of the handguard to the top of the receiver cover. Various optical sights can be attached. In addition, a newly developed locking mechanism has been adopted to eliminate aiming blur caused by rattling of the receiver cover. Just by tightening the centering dial, the receiver cover will be firmly fixed, and at the same time the rail will automatically adjust its position to the center.

• front/rear sight The front sight can be adjusted vertically and horizontally using a special adjustment tool. In addition, the rear end of the rail of the receiver cover is equipped with a foldable backup rear sight that takes into consideration the use of an optical sight.

• folding stock The collapsible folding stock uses a convex skeleton design that makes it easy to move the muzzle up and down. This is a removable type that is fixed to the receiver with a 20mm wide (Picatinny standard) rail. The stock body is made of reinforced plastic, and the stock base is equipped with a QD hole that is compatible with the separately sold "QD sling swivel."

• Aluminum die-cast magazine A Bakelite type magazine with a capacity of 35 bullets is reproduced by integral molding of aluminum die-casting.

  full length	548 mm / 741 mm (when stock is expanded)
  gun length	200mm
  weight	3,550 g (including empty magazine)
  bullet	6mm BB (0.2~0.25g)
  power source	Dedicated gas (*1)
  Number of bullets	35 + 1 shot (1 shot when loaded in the main body)
  Model name	AKX
  kinds	Assault rifle