Gas Rifles

Japan is proud of the world's domestically produced assault rifle that is adopted by the Self-Defense Forces.

The purely domestic assault rifle "Type 89 5.56mm rifle (fixed stock type)" is now available in gas blowback! Tokyo Marui's gas blowback is equipped with a ``3-burst mechanism'' for the first time, and uses the current model's engraving and left-side selector lever. Just like the real thing, you can use metal and resin parts to enjoy the difference in weight and texture when you hold it in your hand. In addition, when performing maintenance or adjusting the variable hop-up system, normal disassembly is possible using procedures close to the real thing, and the shape of the internal mechanism, which is usually covered by exterior parts, has been reproducible. . This is a carefully selected model that aims to be the ultimate Type 89.

Major features

• Achieves intense blowback The bolt operates in conjunction with the firing, allowing you to enjoy the most intense recoil shock ever.

• Achieves high durability Equipped with a special "Z-System 89 type ver." to prevent wear and damage of the bolt stop button due to hold-open. By incorporating the Z-system into the bolt, the reproducibility of the internal shape has also been improved.

• Realistic movable gimmick It faithfully reproduces the functions of the real thing, such as loading the first bullet by operating the cocking handle, opening the bolt and opening the bolt after changing the magazine, opening and closing the dust cover and bottom of the grip, and deploying the bipod attached to the outer barrel. Masu. In addition, takedown (normal disassembly for maintenance) can be performed in a form close to the real thing.

• Hand guard that combines metal and resin The hand guard, which can be removed when adjusting the variable hop-up system, reproduces the combination of steel press and resin just like the real thing. In addition, the shape of the gas cylinder and outer barrel covered by the hand guard has also been improved in reproducibility.

• Die-cast bipod included The bipod can be easily attached to the barrel by lever operation and can be folded just like the real thing.

• Adjustable front/rear sight The front sight can be adjusted up and down using the included adjustment tool. In addition, the rear sight can be finely adjusted up and down and left and right using dials.

• Compatible with various muzzle options The muzzle flash hider is a double nut type that is fixed with a barrel nut. By removing the flash hider, you can install a muzzle option with a 14mm reverse thread such as a silencer.

• Aluminum die-cast magazine The aluminum die-cast magazine, which holds 35 bullets, reproduces the shape of the remaining bullet confirmation hole on the left side.

• Model: WE 999C (G36C style), item code WE-R-G001
• Power source: green gas (not included)
• System: open bolt gas blowback
• Fire modes: safe, semi and full auto
• Muzzle velocity: approx. 350 FPS (green gas)
• Hop-up: adjustable
• Magazine capacity: 30 rounds
• Length: 711mm (510mm folded)
• Inner barrel length: 360mm
• Muzzle thread: 14mm CCW (negative)
• Weight: approx. 2.75kg
• Body: nylon fibre polymer with metal internals
• In the box: rifle, 30-round gas magazine and instructions

• Achieves intense blowback Equipped with an AK-specific blowback engine that uses a large piston with a diameter of approximately 19mm. The bolt also operates in conjunction with the firing, allowing you to enjoy the intense recoil shock.

• realistic operation It faithfully reproduces the functions similar to the real thing, such as loading the first bullet by operating the bolt handle and stopping the bolt from advancing when it runs out of bullets.

• short barrel custom The easy-to-handle 8.7-inch barrel and original design 3-port muzzle brake are machined from aluminum. In addition, by removing the muzzle brake, it is possible to install muzzle options with 14mm reverse thread specifications such as a silencer.

• M-LOK rail system The latest rail system "M-LOK" is adopted for the highly rigid aluminum cutting hand guard. The lower hand guard allows you to add rails only where needed, and has a slim and easy-to-handle design. M-LOK rails with a width of 20 mm (Picatinny standard) come with one each of three types: 3 slots, 5 slots, and 7 slots. It can be easily attached and detached using the included hex wrench.

• Upper rail standard equipment Equipped with a mount rail with a width of 20mm (Picatinny standard) from the top of the handguard to the top of the receiver cover. Various optical sights can be attached. In addition, a newly developed locking mechanism has been adopted to eliminate aiming blur caused by rattling of the receiver cover. Just by tightening the centering dial, the receiver cover will be firmly fixed, and at the same time the rail will automatically adjust its position to the center.

• front/rear sight The front sight can be adjusted vertically and horizontally using a special adjustment tool. In addition, the rear end of the rail of the receiver cover is equipped with a foldable backup rear sight that takes into consideration the use of an optical sight.

• folding stock The collapsible folding stock uses a convex skeleton design that makes it easy to move the muzzle up and down. This is a removable type that is fixed to the receiver with a 20mm wide (Picatinny standard) rail. The stock body is made of reinforced plastic, and the stock base is equipped with a QD hole that is compatible with the separately sold "QD sling swivel."

• Aluminum die-cast magazine A Bakelite type magazine with a capacity of 35 bullets is reproduced by integral molding of aluminum die-casting.

  full length	548 mm / 741 mm (when stock is expanded)
  gun length	200mm
  weight	3,550 g (including empty magazine)
  bullet	6mm BB (0.2~0.25g)
  power source	Dedicated gas (*1)
  Number of bullets	35 + 1 shot (1 shot when loaded in the main body)
  Model name	AKX
  kinds	Assault rifle

   

High-performance assault carbine that supports USSOCOM

USSOCOM (= United States Special Operations Forces) is known for demanding higher performance for guns used than any other unit in the world. The M4A1 carbine, developed in response to their requests, became his gas blowback machine gun. By installing new mechanisms such as the Z system developed for the M4A1 MWS, it achieves both high durability and operating performance. In addition, the hand guard with a double heat shield inside and the barrel shape of the initial model are reproduced, and we are particular about reality.

Major features

• Delivers powerful blowback Equipped with a new blowback engine that uses a large piston with a diameter of about 19mm. The bolt also operates in conjunction with the launch, and you can enjoy an unprecedentedly strong recoil shock.

• Realizes high durability A new Z-system that prevents wear and damage to the bolt catch, a piston absorber and friction relief bolt rollers that reduce the burden on internal parts due to bolt operation, and a barrel that prevents loosening due to recoil and always keeps the barrel centered. The durability against strong recoil shock has been improved, such as the clamp mechanism.

• Realistic movable gimmick It faithfully reproduces the same functions as the real thing, such as loading the first bullet by operating the charging handle, bolt catch operation after bolt opening and magazine change, and enhanced stock that can be adjusted in 6 stages. In addition, the carrying handle can be attached and detached, and field stripping (normal disassembly for maintenance) can be performed in a form close to the real thing.

• Pursuing reality even in hidden parts The inside of the handguard has a double heat shield, and the outer barrel reproduces the initial model with a narrower part that goes inside the handguard. We are also particular about the reproducibility of the parts that cannot be seen from the outside.

• Mil-Spec Paint Cerakote Cerakote, which has a strong coating film and excellent abrasion resistance, is used for the upper/lower frame and bolts. You can enjoy the texture just like the real thing.

• Adjustable front/rear sights The top and bottom of the front sight can be adjusted with the included adjustment tool. In addition, the rear sight can be finely adjusted by dial operation up and down and left and right respectively.

• Compatible with various muzzle options If you remove the muzzle compensator, you can install a muzzle option with a 14mm reverse screw specification such as a silencer.

• Aluminum die-cast magazine The magazine, which holds 35 bullets and is made of die-cast aluminum, reproduces the weight of a fully loaded magazine.

A new era of M4 Shorty that evolves flexibly

A CQBR replaces the upper receiver with each barrel to make it a short barrel of 10.3 inches in order to make the M4 compatible with close quarters combat (CQB = Close Quarter Battle) in a narrow room. Of the three versions of CQBR, the model called "Block1" is available in his gas blowback machine gun! By installing new mechanisms such as the Z system developed for the M4A1 MWS, we pursued the reality of shape and texture while achieving both high durability and operating performance. In addition, the scalability for optional parts has been enhanced, making it easy to handle even in narrow spaces.

Major features

• Delivers powerful blowback Equipped with a blowback engine that uses a large piston with a diameter of about 19mm. The bolt also operates in conjunction with the launch, and you can enjoy an unprecedentedly strong recoil shock.

• Realizes high durability A new Z-system that prevents wear and damage to the bolt catch, a piston absorber and friction relief bolt rollers that reduce the burden on internal parts due to bolt operation, and a barrel that prevents loosening due to recoil and always keeps the barrel centred. The durability against strong recoil shock has been improved, such as the clamp mechanism.

• Realistic movable gimmick It faithfully reproduces the same functions as the real thing, such as loading the first bullet by operating the charging handle, bolt catch operation after bolt opening and magazine change, and crane-type stock that can be adjusted in 6 stages. In addition, field stripping (normal disassembly for maintenance) can be performed in a form close to the real thing.

• Equipped with metal RAS Handguard Equipped with RAS (Rail Adapter System) with mounting rails on four sides, top, bottom, left and right. In addition to the standard KAC type vertical foregrip, various optional parts compatible with the Picatinny standard (20mm width) can be installed. In addition, the heat shield inside the RAS is also reproduced.

• Mil-Spec Paint Cerakote Cerakote, which has a strong coating film and excellent abrasion resistance, is used for the upper/lower frame and bolts. You can enjoy the texture just like the real thing.

• Adjustable front/rear sights The top and bottom of the front sight can be adjusted with the included adjustment tool. In addition, the LMT type rear sight can be finely adjusted by dialing up and down and left and right.

• Compatible with various muzzle options If you remove the muzzle compensator, you can install a muzzle option with a 14mm reverse screw specification such as a silencer.

• Aluminum die-cast magazine The magazine, which holds 35 bullets and is made of die-cast aluminium, reproduces the weight of a fully loaded magazine.

11.5 inch URG-I selected by Green Berets

The 11.5-inch barrel URG-I, which has been confirmed to be used by the U.S. Army Special Forces "Green Berets," is now available as a gas blowback machine gun! The uniquely shaped 10.5 inch hand guard uses an STR type stock. This is a model that pursues specifications unique to URG-I.

Major features

• Achieves intense blowback Equipped with a new blowback engine that uses a large piston with a diameter of approximately 19mm. The bolt also operates in conjunction with the firing, allowing you to enjoy the intense recoil shock.

• Achieves high durability A new mechanism, the Z-system, prevents wear and damage of the bolt catch, a piston absorber and friction relief bolt roller that reduces the stress on internal parts due to bolt operation, and a barrel that prevents loosening due to recoil and always maintains the center of the barrel. The durability of the clamp mechanism and other features against strong recoil shock has been improved.

• Realistic movable gimmick It faithfully reproduces the functions of the original, such as loading the first bullet by operating the charging handle, bolt catch operation after opening the bolt and changing the magazine, and the STR type stock whose length can be adjusted in 6 stages.

• M-LOK rail system The hand guard reproduces the 10.5-inch super modular rail (SMR) MK16 M-LOK DDC, which uses the rail system "M-LOK". M-LOK rails with a width of 20 mm (Picatinny standard) come with one each of three types: 3 slots, 5 slots, and 7 slots. It can be easily attached and detached using the included hex wrench.

• Reality for enthusiasts The DD type URG-I exclusive gas block, 11.5 inch barrel, and ambi charging handle are also faithfully reproduced.

• Foldable front/rear sights The front sight, which can be adjusted up and down, and the rear sight, which can be adjusted up and down, left and right, are foldable to allow use of optical sights. In addition, since it is attached via the mounting rail, it is possible to change the mounting position and remove it.

• Compatible with various muzzle options By removing the muzzle flash hider, you can attach a 14mm reverse threaded muzzle option such as a silencer.

• Aluminum die-cast magazine The aluminium die-cast magazine with a capacity of 35 rounds reproduces the weight of a real magazine fully loaded with bullets.

The definitive version of the current US military firearms by the M4 carbine enhancement program

Equipped with RAS (Rail Adapter System), the highly expandable "M4A1 MWS" that supports various optional parts is finally available with gas blowback! The dedicated blowback engine contains a cylinder with a diameter of 19mm, which is the largest in the series, and generates an unprecedentedly strong recoil shock. Equipped with a new mechanism to improve durability, such as the Z-system, the ultimate gas blowback that combines the pursuit of shape reproduction and texture realism, and the high accuracy and operation performance of Tokyo Marui. Model.

Major features

• Delivers powerful blowback Equipped with a new blowback engine that uses a large piston with a diameter of about 19mm. The bolt also operates in conjunction with the launch, and you can enjoy an unprecedentedly strong recoil shock.

• Realizes high durability A new Z-system that prevents wear and damage to the bolt catch, a piston absorber and friction relief bolt rollers that reduce the burden on internal parts due to bolt operation, and a barrel that prevents loosening due to recoil and always keeps the barrel centered. The durability against strong recoil shock has been improved, such as the clamp mechanism.

• Realistic movable gimmick It faithfully reproduces the same functions as the real thing, such as loading the first bullet by operating the charging handle, bolt catch operation after bolt opening and magazine change, and enhanced stock that can be adjusted in 6 stages. In addition, field stripping (normal disassembly for maintenance) can be performed in a form close to the real thing.

• Equipped with metal RAS Handguard Equipped with RAS (Rail Adapter System) with mounting rails on four sides, top, bottom, left and right. Various optional parts compatible with the Picatinny standard (20mm width) such as flashlight and fore grip can be installed. In addition, the heat shield inside the RAS is also reproduced.

• Mil-Spec Paint Cerakote Cerakote, which has a strong coating film and excellent abrasion resistance, is used for the upper/lower frame and bolts. You can enjoy the texture just like the real thing.

• Adjustable front/rear sights The top and bottom of the front sight can be adjusted with the included adjustment tool. In addition, the rear sight can be finely adjusted by dial operation up and down and left and right respectively.

• Compatible with various muzzle options If you remove the muzzle compensator, you can install a muzzle option with a 14mm reverse screw specification such as a silencer.

• Aluminum die-cast magazine The magazine, which holds 35 bullets and is made of die-cast aluminum, reproduces the weight of a fully loaded magazine.

Main features

• Realizes strong blowback It is equipped with a new blowback engine that uses a large piston with a diameter of about 19 mm. The bolt operates with the firing, allowing you to enjoy an unprecedentedly strong recoil shock.

• High durability The new Z-system prevents wear and tear on the bolt catch, while the piston absorber and friction relief bolt roller reduce the strain on the internal parts caused by the bolt's action, and the barrel clamp mechanism prevents loosening due to recoil and keeps the barrel centred at all times improves durability against strong recoil shock.

• Realistic moving gimmick It faithfully reproduces all the functions of the real thing, such as loading the first bullet by operating the charging handle, opening the bolt and operating the bolt catch after changing the magazine, and an enhanced stock that can be adjusted to six different lengths.

• Daniel Defense officially approved The metal RIS2 rail, which has mounting rails on the four sides of the handguard, is officially approved by Daniel Defense, which has a track record of being officially adopted by the U.S. military. It is possible to mount various optional parts that are compatible with the 20mm wide rail.

• Color reproduction and special surface treatment The rail handguard, front sight, and stock reproduce the different FDE color tones applied to each part, just like the real thing. The metal rail handguard reproduces the color by anodizing, which has excellent abrasion resistance. In addition, the upper/lower frame and bolt are made of Cerakote, which has a strong coating and excellent abrasion resistance. You can enjoy the texture just like the real thing.

• Adjustable folding front/rear sights The front sight can be adjusted up and down, and the rear sight can be adjusted left and right, and is foldable to allow for the use of optical sights. In addition, since it is attached via a mounting rail, the mounting position can be changed and it can be removed.

• Compatible with various muzzle options By removing the flash hider from the muzzle, you can attach a muzzle option with a 14mm reverse thread, such as a silencer.

• Die-cast aluminium magazine The die-cast aluminium magazine holds 35 rounds and reproduces the weight of a real magazine fully loaded with bullets.

Features:

• Full metal construction
• Polymer furniture
• 20 or 30 round magazines available
• Adjustable hop up
• FPS (0.20g): TBC

Features:

• Full metal construction
• Polymer furniture
• Fits 20 or 30 round WE magazines
• FPS (0.20g): TBC

Bolt's new gas blowback 'MAS' series is derived from the common MWS system, only with extra kick. These rifles are capable of using typical MWS magazines, such as Tokyo Marui and Modify-Tech.

Each gun features an aluminium receiver, giving it a comfortable, intermediate weight to the whole rifle, with plenty of reinforcement to withstand the powerful blowback of each shot.

The URG-U's chunky handguard grants its user all the customisation options they could dream of: ergonomic foregrips, tactical lasers and torches...the choice is entirely within the hands of the user.

MAS: Mega - Airflow - System

• Made from Aluminium/ABS, Nylon, Glass Fibre and Steel
• Detachable front and rear flip-up iron sights
• Safe, Semi & Full-Auto firing modes
• Includes 1x 35rd Gas Magazine
• Adjustable Hop-up

MAS: Mega - Airflow - System

• Made from Aluminium/ABS, Nylon, Glass Fibre and Steel
• Detachable front and rear flip-up iron sights
• Safe, Semi & Full-Auto firing modes
• Includes 1x 35rd Gas Magazine
• Adjustable Hop-up

Via EMG, this is a fully licensed replica of Daniel Defense's V7 'P' - standing for 'Pistol', believe it or not, as this rifle is configured to be as compact as possible. Featuring an MLOK handguard, whilst retaining the wonderfully-carved and stippled stock that DD famously use across their AR-pattern rifles.

Bolt's new gas blowback 'MAS' series is derived from the common MWS system, only with extra kick. These rifles are capable of using typical MWS magazines, such as Tokyo Marui and Modify-Tech.

Each gun features an aluminium receiver, giving it a comfortable, intermediate weight to the whole rifle, with plenty of reinforcement to withstand the powerful blowback of each shot.

MAS: Mega - Airflow - System

• Made from Aluminium/ABS, Nylon, Glass Fibre and Steel
• Detachable front and rear flip-up iron sights
• Safe, Semi & Full-Auto firing modes
• Includes 1x 35rd Gas Magazine
• Adjustable Hop-up