- All categories
Welcome to Airsoft Wholesale UK
Main menu
Airsoft Guns
- Airsoft Guns
-
HPA - High Pressure Air Airsoft Guns
-
Other Airsoft Weapon Categories
-
RIFs by Power Type
Airsoft Magazines
Weapon Accessories
- Weapon Accessories
-
Grips & Bipods
-
Torches & Lasers
Parts and Upgrades
- Parts and Upgrades
-
AEG Parts and Upgrades
- AEG Parts and Upgrades
- AEG Motors
- Barrels - AEG
- AEG Cylinders
- AEG Cylinder Heads
- AEG Gear Sets
- AEG Gearboxes
- AEG Gearbox Shells & Screws
- AEG Gearbox Small Parts
- Mosfets & ETUs
- AEG Hop Buckings
- AEG Hop Nubs & Tensioners
- AEG Hop-Up Chambers
- AEG Pinion Gears
- AEG Pistons
- AEG Piston Heads
- AEG Nozzles
- AEG Springs
- AEG Spring Guides
- AEG Triggers
- Bearings and Shims
- Sector Gears & Delay Chips
- Selector Plates
- Tappet Plates
- Wiring & Switch Assemblies
-
GBBR Parts and Upgrades
- GBBR Parts and Upgrades
- Gas Blowback Rifle Parts
- GBBR Bolts & Bolt Carriers
- GBBR Buffers & Recoil Weights
- GBBR Hop Buckings
- GBBR Hop Nubs
- GBBR Hop-Up Chambers
- GBBR Inner Barrels
- GBBR Magazine Parts
- GBBR Nozzles
- GBBR NPAS & Valves
- GBBR Trigger Boxes & Fire Control
- GHK Spare Parts
- MWS Parts & Accessories
- Tokyo Marui GBB Parts
-
Sniper Parts and Upgrades
- Sniper Parts and Upgrades
- Shop All Sniper Upgrades
- Rifle Scopes
- Sniper Bolt Handles
- Sniper Chassis & Stocks
- Sniper Cylinders
- Sniper Cylinder Heads
- Sniper Hop Buckings
- Sniper Hop Nubs
- Sniper Hop-Up Chambers & Units
- Sniper Inner Barrels
- Sniper Outer Barrels
- Sniper Mag Catches
- Sniper Pistons
- Sniper Piston Heads
- Sniper Rails
- Sniper Spare Parts & Fixings
- Sniper Springs & Power Rings
- Sniper Spring Guides
- Sniper TDC Kits & Hop Arms
- Sniper Trigger Groups & Sears
- VSR Upgrades
- Silverback SRS Upgrades
- All Silverback Parts & Upgrades
- Silverback VKS Parts & Upgrades
-
Pistol Parts and Upgrades
- Pistol Parts and Upgrades
- Pistol Blowback Units & Piston Heads
- Pistol Charging & Cocking Handles
- Pistol Compensators
- Pistol Fire Control Parts
- Pistol Frames
- Pistol Grips & Grip Panels
- Pistol Guide Rods
- Pistol Hammers
- Pistol Hammer Springs
- Pistol Hop-Up Chambers & TDC
- Pistol Inner Barrels
- Pistol Loading Nozzles
- Pistol Magwells
- Pistol Magazine Base Plates
- Pistol Magazine Parts
- Pistol Mag Releases
- Pistol Nozzle Springs
- Pistol Outer Barrels
- Pistol Recoil Springs
- Pistol Safeties
- Pistol Seals, O-Rings & Small Parts
- Pistol Sights & Fibre Optics
- Pistol Slide Stops
- Pistol Triggers
- Pistol Valves & Valve Knockers
- AAP-01 Upgrades
- AAP-01 Uppers & Conversion Kits
- Hi-Capa Upgrades
- MK23 Upgrades
-
Tool Kits
Clothing & Gear
- Clothing & Gear
-
Chest Rigs & Plate Carriers
-
Eye and Face Protection
Consumables
Brands
- Brands
-
I
Info
Your cart
Hi-Capa Airsoft Pistols
24 products
24 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
High capacity "DOR" model that can be equipped with Micro Pro Site
A DOR (Direct Optics Ready) model that can be equipped with the separately sold "Micro Pro Site" is now available in Tokyo Marui's high-capacity series! We have created a new slide with a special design, and it has become possible to "mount" the Micro Pro Site in a "lower position" without mounting. In addition, it is a model that has been upgraded everywhere while being based on the conventional gas blowback high capacity series, such as improved operability by reviewing the internal mechanism and improved operability considering the installation of micro prosite.
| full length | 220 mm |
|---|---|
| Gun height | 112 mm |
| weight | 839 g (when an empty magazine is installed) |
| bullet | 6mm BB (0.2-0.25g) |
| Power source | 144a Gas only |
| Number of bullets | 31 + 1 shot (1 shot when loaded in the main body) |
| Model name | Hi-CAPA DOR |
SPECIFICATIONS:
- Box Length: 320mm
- Box Width: 170mm
- Box Height: 55mm
- Package Gross Weight: 1555.0g
- Pistol Length: 205mm
- Pistol Height: 150mm
- Pistol Weight (No Mag): 625.0g
- Magazine Weight: 365.0g
- Inner Barrell Length: 105mm
- Muzzle Velocity: 350 FPS
PACKAGE INCLUDES: 1 x SA-DS0200 1 x Magazine
| full length | 220 mm |
|---|---|
| Barrel length | 112 mm |
| weight | 839 g (with empty magazine) |
| bullet | 6mm BB (0.2-0.25g) |
| Power Source | Dedicated gas (※1) |
| Magazine capacity | 31 + 1 rounds (1 round loaded in the main body) |
| Model name | Hi-CAPA WHITE DOR |
| kinds | Handgun (automatic) |
-
Compatible with optional micro-pro sight The slide is specially designed to accommodate a micro-pro sight (sold separately). If you remove the rear sight at the rear of the slide, you can attach the micro-pro sight directly. In addition, the included high mount base allows you to mount the micro-pro sight at a high position, and the mount-integrated backup sight allows you to sight through the micro-pro sight.
-
Customization to improve the reliability and speed of operation It features a flat short trigger that makes trigger control easy and a long slide stop. The slide has wide serrations and a rib (protrusion) that makes it easier to pull the slide when a micro-pro sight is attached.
-
Powerful blowback The slide recoils forcefully upon firing, realistically reproducing the impressive appearance and strong recoil at the time of firing.
-
Upgrade the internal mechanism It uses a blowback engine with a new piston and a short recoil system similar to the M45A1. It has a low-position micro-pro sight and improved stability.
-
Metal Notch Spacer The metal parts on the inside of the slide absorb the stress when the slide is opened, preventing wear and tear on the slide stop and notch.
-
Mount rail included A mounting rail can be added to the front of the trigger guard. A flashlight compatible with a 20mm rail can be attached.
-
Die-cast magazine Comes with a die-cast magazine that holds 31 rounds and is cold-resistant.
- full length: 199mm
- barrel length: 86mm
- weight: 801 g (with empty magazine installed)
- bullet: 6mm BB (0.2~0.25g)
- power source: gas
- mag capacity: 28
- Simply remove the rear sight to attach the Micro Pro Sight directly to the slide.
- A supplied high-mount base enables elevated optic positioning if preferred.
- The mount base integrates a backup iron sight that can be used when the optic is removed (such as during battery replacement).
- Front serrations and raised ribs for improved grip during slide manipulation—even when an optic is mounted.
- A flat-style short trigger that enhances trigger control and responsiveness.
- An extended slide stop for more positive and intuitive operation.
- A newly shaped rounded grip frame that offers a more natural, comfortable feel compared to the previous squared design.
- Smooth and stable cycling
- Consistent, dependable performance
- Low-profile optic mounting without sacrificing reliability
- 28-round capacity
- Strong resistance to cool temperatures
- Efficient gas performance and consistent cycling
Features: The "Potato Masher" Compensator 20mm RIS Rail for accessories "Hard Kick" Gas Blow Back action Beaver Tail Grip safety Ambidextrous Hammer lock safety Adjustable sights for Windage and Distance Textured grip for enhanced Grip and Control Raised magazine release Threaded outer barrel Silver Barrel, Hammer and Trigger
Package Includes: Pistol Magazine User Manual
HI-CAPA 4.3 is a Original Design of Tokyo Marui. WE has modified the original version and developed this FULL METAL Heavy Weight Version of HI-CAPA 4.3. Government model based frame with Full Metal Slide, Barrel & Lower Frame, this WE HI-CAPA makes a great side arm on your next skirmish
FULL METAL CONSTRUCTION resemble the M1911 HI-CAP Model
Gas Blow Back Pistol with Semi-Automatic Shooting Mode
Extreme smooth slide cycling with clicks & clacks metal sound
28 Rds High Loading Capacity Magazine (Compatible with Tokyo Marui Hi-Capa)
Innovative Hop-Up Thumb Dial located inside the gun (can see after dissemble the slide)
Excellent Craftsmanship with Textured grip and Solid Pistol Frame
Equipped with 20mm lower rail for Flashlight or Laser Sight attachment
Powerful 270fps with 144a
Graphite Finish look very realistic
A metal Hi-Capa gas blowback pistol with a two part slide. The front part of the slide is fixed and the rear half moves. It has a working safety that stops the hammer from moving and firing the pistol. The magazines hold 31 rounds and the pistol has an adjustable hop unit.
Features: Metal construction with ABS grip Gas powered Adjustable hop unit 31 round magazine capacity Front and Rear iron sights Working safety Grip safety
Weight: 1000g Main Colour: Black Length: 222mm Barrel Length: ~112mm Blow Back: Yes Hop-up: Fully Adjustable Shooting Mode: Semi-Automatic Magazine Capacity: 31+1 Rounds Ammunition Type: 6mm BB Pistol Power Source: Green Gas Power (Muzzle Velocity): 300FPS (Green Gas @ 25C Room Temperature)
The top model in the WE High Capa range was introduced in 2015. The Hi-Capa “T-Rex” features a massive 28 round capacity magazine and a plethora of tactical and practical features. Full metal construction combined with amazing WE-Tech FORCE customization and upgrades means this is the pinnacle of WE competition race guns.
Tactical features such us the high visibility fibre optic sights also help with swift target acquisition. In addition the under barrel rail and pre-threaded barrel for a silencer means that this is a great GBB for the airsoft combat too!
Upgraded Features Silver Vented Slide Black frame with custom stippling Silver Barrel with .45 ACP engraving on chamber Silver Flared magazine well Match style trigger Green Fibre-Optic hybrid front sight Orange Fibre-Optic rear elevation adjustable sight WE.T engraving on barrel Barrel threaded for attachments Ambidextrous safety Under barrel dust cover rail mount WEI-E Technology Custom engraved logo on slide Comes with Mounting system for DOCTOR Style Red Dot Sights. Specification Blow Back Yes Construction Metal Slide and Polymer Frame FPS (0.2g) ~290 fps @ 17°C with a 0.20g BB +/- 10% Fire Mode Single Hop Up Yes Level of use skirmish, Competition & Collector Magazine Capacity 28 Manufacturer WE Power Gas Scale 1:1 length 230mm Weight – unloaded 696g Weight – loaded with mag 1031g
| full length | 202 mm |
|---|---|
| Gun height | 95 mm |
| weight | 865 g (when an empty magazine is installed) |
| bullet | 6mm BB (0.2-0.25g) |
| Power source | Dedicated gas (* 1) |
| Number of bullets | 28 + 1 shot (1 shot when loaded in the main body) |
| Model name | Hi-CAPA Custom Dual Stainless |
SPECIFICATIONS:
- Box Length: 320mm
- Box Width: 170mm
- Box Height: 55mm
- Package Gross Weight: 1585.0g
- Pistol Length: 210mm
- Pistol Height: 150mm
- Pistol Weight (No Mag): 665.0g
- Magazine Weight: 365.0g
- Inner Barrell Length: 109.9mm
- Muzzle Velocity: 350 FPS
PACKAGE INCLUDES: 1 x SA-DS0100 1 x Magazine
Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.
