- All categories
Welcome to Airsoft Wholesale UK
Main menu
Airsoft Guns
- Airsoft Guns
-
HPA - High Pressure Air Airsoft Guns
-
Other Airsoft Weapon Categories
-
RIFs by Power Type
Airsoft Magazines
Weapon Accessories
- Weapon Accessories
-
Grips & Bipods
-
Torches & Lasers
Parts and Upgrades
- Parts and Upgrades
-
AEG Parts and Upgrades
- AEG Parts and Upgrades
- AEG Motors
- Barrels - AEG
- AEG Cylinders
- AEG Cylinder Heads
- AEG Gear Sets
- AEG Gearboxes
- AEG Gearbox Shells & Screws
- AEG Gearbox Small Parts
- Mosfets & ETUs
- AEG Hop Buckings
- AEG Hop Nubs & Tensioners
- AEG Hop-Up Chambers
- AEG Pinion Gears
- AEG Pistons
- AEG Piston Heads
- AEG Nozzles
- AEG Springs
- AEG Spring Guides
- AEG Triggers
- Bearings and Shims
- Sector Gears & Delay Chips
- Selector Plates
- Tappet Plates
- Wiring & Switch Assemblies
-
GBBR Parts and Upgrades
- GBBR Parts and Upgrades
- Gas Blowback Rifle Parts
- GBBR Bolts & Bolt Carriers
- GBBR Buffers & Recoil Weights
- GBBR Hop Buckings
- GBBR Hop Nubs
- GBBR Hop-Up Chambers
- GBBR Inner Barrels
- GBBR Magazine Parts
- GBBR Nozzles
- GBBR NPAS & Valves
- GBBR Trigger Boxes & Fire Control
- GHK Spare Parts
- MWS Parts & Accessories
- Tokyo Marui GBB Parts
-
Sniper Parts and Upgrades
- Sniper Parts and Upgrades
- Shop All Sniper Upgrades
- Rifle Scopes
- Sniper Bolt Handles
- Sniper Chassis & Stocks
- Sniper Cylinders
- Sniper Cylinder Heads
- Sniper Hop Buckings
- Sniper Hop Nubs
- Sniper Hop-Up Chambers & Units
- Sniper Inner Barrels
- Sniper Outer Barrels
- Sniper Mag Catches
- Sniper Pistons
- Sniper Piston Heads
- Sniper Rails
- Sniper Spare Parts & Fixings
- Sniper Springs & Power Rings
- Sniper Spring Guides
- Sniper TDC Kits & Hop Arms
- Sniper Trigger Groups & Sears
- VSR Upgrades
- Silverback SRS Upgrades
- All Silverback Parts & Upgrades
- Silverback VKS Parts & Upgrades
-
Pistol Parts and Upgrades
- Pistol Parts and Upgrades
- Pistol Blowback Units & Piston Heads
- Pistol Charging & Cocking Handles
- Pistol Compensators
- Pistol Fire Control Parts
- Pistol Frames
- Pistol Grips & Grip Panels
- Pistol Guide Rods
- Pistol Hammers
- Pistol Hammer Springs
- Pistol Hop-Up Chambers & TDC
- Pistol Inner Barrels
- Pistol Loading Nozzles
- Pistol Magwells
- Pistol Magazine Base Plates
- Pistol Magazine Parts
- Pistol Mag Releases
- Pistol Nozzle Springs
- Pistol Outer Barrels
- Pistol Recoil Springs
- Pistol Safeties
- Pistol Seals, O-Rings & Small Parts
- Pistol Sights & Fibre Optics
- Pistol Slide Stops
- Pistol Triggers
- Pistol Valves & Valve Knockers
- AAP-01 Upgrades
- AAP-01 Uppers & Conversion Kits
- Hi-Capa Upgrades
- MK23 Upgrades
-
Tool Kits
Clothing & Gear
- Clothing & Gear
-
Chest Rigs & Plate Carriers
-
Eye and Face Protection
Consumables
Brands
- Brands
-
I
Info
Your cart
Airsoft Helmet Accessories
73 products
73 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Producer: FMA
Weight: 56g
Dimensions: 3.0 "(L) x 2.0625" (W) x 1.375 "(H)
Weight: 1.5 ounces (with out battery)
Strength: (1) CR123 lithium battery
Materials: impact resistant polymer
Description:
Infrared and Green (overt) strobe light mode. The base plate is shaped to fit to the curvature of modern combat helmets. Positive one-handed operation with a tactile power switch and vibrating motor feedback.
Operation Instruction:
1. Push the "Tail Cap Switch ON/OFF" button, the motor vibrates three times to let the operator know
the strobe is active, the IR strobe function is active at the same time.
2. Change to visible light mode, press both "side switch" together, the motor vibrates three times and
the visible light is active on mode 1 (light up 1/10s, slake 1s)
3. In Visible mode, you can press both "side switch" together to change from mode 1 to mode 5 (light up 1/10s, slake 1/5s),
auto cycle to mode 1 after mode 5.
Battery: 1x CR123a (Battery not included)
After Fitting battery will vibrate both sides of the keys pressed simultaneously, the green light flashes, press the back button, the green flash will be off while also flashing infrared.
Weight: 56g
Dimensions: 3.0 "(L) x 2.0625" (W) x 1.375 "(H)
Weight: 1.5 ounces (with out battery)
Strength: (1) CR123 lithium battery
Materials: impact resistant polymer
Description: Infrared and Red (overt) strobe light mode. The base plate is shaped to fit to the curvature of modern combat helmets. Positive one-handed operation with a tactile power switch and vibrating motor feedback.
Operation Instruction:
1. Push the "Tail Cap Switch ON/OFF" button, the motor vibrates three times to let the operator know the strobe is active, the IR strobe function is active at the same time.
2. Change to visible light mode, press both "side switch" together, the motor vibrates three times and the visible light is active on mode 1 (light up 1/10s, slake 1s)
3. In Visible mode, you can press both "side switch" together to change from mode 1 to mode 5 (light up 1/10s, slake 1/5s), auto cycle to mode 1 after mode 5.
Battery: 1x CR123a (Battery not included)
After Fitting battery will vibrate both sides of the keys pressed simultaneously, the red light flashes, press the back button, the red flash will be off while also flashing infrared.
Weight: 56g
Dimensions: 3.0 "(L) x 2.0625" (W) x 1.375 "(H)
Weight: 1.5 ounces (with out battery)
Strength: (1) CR123 lithium battery
Materials: impact resistant polymer
Description: Infrared and red (overt) strobe light mode. The base plate is shaped to fit to the curvature of modern combat helmets. Positive one-handed operation with a tactile power switch and vibrating motor feedback.
Operation Instruction:
1. Push the "Tail Cap Switch ON/OFF" button, the motor vibrates three times to let the operator know the strobe is active, the IR strobe function is active at the same time.
2. Change to visible light mode, press both "side switch" together, the motor vibrates three times and the visible light is active on mode 1 (light up 1/10s, slake 1s)
3. In Visible mode, you can press both "side switch" together to change from mode 1 to mode 5 (light up 1/10s, slake 1/5s), auto cycle to mode 1 after mode 5.
Battery: 1x CR123a (Battery not included)
After Fitting battery will vibrate both sides of the keys pressed simultaneously, the red light flashes, press the back button, the red flash will be off while also flashing infrared.
FMA NVG Lanyard For Ops Core VAS Three Hole Shroud - Tan
Attach to your wilcox style mount to enable lanyard for night vision devise in case of accidental dislodge of your units.
3 Modes Fast flash / Flash / constant
Fits in 1 inch webbing
UP to 100 hour battery life (non replaceable)
Water Proof Size: 50 x 43 x 12mm
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
Features:
Durable tear resistant fabric
Stretch edge to get the perfect fit over a helmet
Four velcro tabs to help secure the cover on the inside of the helmet
Top mounted bungee to secure accessories
Side elastic bands for clean wire routing
Velcro panels for patches and IFF
There are two size in M/L and L/XL
FMA Helmet velcro for airframe helmets - Dark Earth
Replace or additional full set of external velcro to attach accessories onto your airframe style helmet
Accessories for use in the EX helmet series, in view of the unique design of the EX series helmet, use two screws, guide rail need not tear open outfit, nut is placed within the guide rail, bad can freely adjust the suitable position, very simple operation, respectively, two series of headphones, GEN1 suitable for use in Comtac I/II headphones; GEN2 suitable for MSA headphones.
Manufacturer: FMA
Two series of colour:
FMA PT headset and helmet rail adapter
- 3 colours in stock: DE/FG/Black
-Suitable for use in Comtac I/II headphones
TB997 - BK FMA EX Headset and Helmet Rail Adapter Set GEN1 BK
TB997 - DE FMA EX Headset and Helmet Rail Adapter Set GEN1 DE
TB997 - FG FMA EX Headset and Helmet Rail Adapter Set GEN1 FG
The FMA 'Jaw Bone' folding helmet mask is a solid alternative to the traditional mesh lower. The mask is constructed of impact-resistant nylon and is designed to mount directly onto your helmet. This more permanent mounting option offers better protection and greater ventilation by keeping the mask off your skin at a fixed point. The QD mounting brackets also enable it to be detached if you wanted to store your helmet in a kit bag or under a seat for example. The whole mask also folds flat with its reverse hinges - giving it a profile that is no larger than a set of sunglasses. The 'Goggle Type' will also enable you to mount your TMC SF QD Goggle directly onto the kit with its moulded hooks.
Available in 2 styles and 3 colours
Type A = No goggle cord hook
Type B = Includes goggle cord hook
*Mask only Helmet and accessories Not included
Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.
