- All categories
Welcome to Airsoft Wholesale UK
Main menu
Airsoft Guns
- Airsoft Guns
-
HPA - High Pressure Air Airsoft Guns
-
Other Airsoft Weapon Categories
-
RIFs by Power Type
Airsoft Magazines
Weapon Accessories
- Weapon Accessories
-
Grips & Bipods
-
Torches & Lasers
Parts and Upgrades
- Parts and Upgrades
-
AEG Parts and Upgrades
- AEG Parts and Upgrades
- AEG Motors
- Barrels - AEG
- AEG Cylinders
- AEG Cylinder Heads
- AEG Gear Sets
- AEG Gearboxes
- AEG Gearbox Shells & Screws
- AEG Gearbox Small Parts
- Mosfets & ETUs
- AEG Hop Buckings
- AEG Hop Nubs & Tensioners
- AEG Hop-Up Chambers
- AEG Pinion Gears
- AEG Pistons
- AEG Piston Heads
- AEG Nozzles
- AEG Springs
- AEG Spring Guides
- AEG Triggers
- Bearings and Shims
- Sector Gears & Delay Chips
- Selector Plates
- Tappet Plates
- Wiring & Switch Assemblies
-
GBBR Parts and Upgrades
- GBBR Parts and Upgrades
- Gas Blowback Rifle Parts
- GBBR Bolts & Bolt Carriers
- GBBR Buffers & Recoil Weights
- GBBR Hop Buckings
- GBBR Hop Nubs
- GBBR Hop-Up Chambers
- GBBR Inner Barrels
- GBBR Magazine Parts
- GBBR Nozzles
- GBBR NPAS & Valves
- GBBR Trigger Boxes & Fire Control
- GHK Spare Parts
- MWS Parts & Accessories
- Tokyo Marui GBB Parts
-
Sniper Parts and Upgrades
- Sniper Parts and Upgrades
- Shop All Sniper Upgrades
- Rifle Scopes
- Sniper Bolt Handles
- Sniper Chassis & Stocks
- Sniper Cylinders
- Sniper Cylinder Heads
- Sniper Hop Buckings
- Sniper Hop Nubs
- Sniper Hop-Up Chambers & Units
- Sniper Inner Barrels
- Sniper Outer Barrels
- Sniper Mag Catches
- Sniper Pistons
- Sniper Piston Heads
- Sniper Rails
- Sniper Spare Parts & Fixings
- Sniper Springs & Power Rings
- Sniper Spring Guides
- Sniper TDC Kits & Hop Arms
- Sniper Trigger Groups & Sears
- VSR Upgrades
- Silverback SRS Upgrades
- All Silverback Parts & Upgrades
- Silverback VKS Parts & Upgrades
-
Pistol Parts and Upgrades
- Pistol Parts and Upgrades
- Pistol Blowback Units & Piston Heads
- Pistol Charging & Cocking Handles
- Pistol Compensators
- Pistol Fire Control Parts
- Pistol Frames
- Pistol Grips & Grip Panels
- Pistol Guide Rods
- Pistol Hammers
- Pistol Hammer Springs
- Pistol Hop-Up Chambers & TDC
- Pistol Inner Barrels
- Pistol Loading Nozzles
- Pistol Magwells
- Pistol Magazine Base Plates
- Pistol Magazine Parts
- Pistol Mag Releases
- Pistol Nozzle Springs
- Pistol Outer Barrels
- Pistol Recoil Springs
- Pistol Safeties
- Pistol Seals, O-Rings & Small Parts
- Pistol Sights & Fibre Optics
- Pistol Slide Stops
- Pistol Triggers
- Pistol Valves & Valve Knockers
- AAP-01 Upgrades
- AAP-01 Uppers & Conversion Kits
- Hi-Capa Upgrades
- MK23 Upgrades
-
Tool Kits
Clothing & Gear
- Clothing & Gear
-
Chest Rigs & Plate Carriers
-
Eye and Face Protection
Consumables
Brands
- Brands
-
I
Info
Your cart
TAC-41 Airsoft Sniper Rifles
8 products
8 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
- Size: 91,6 cm
- Minimum weight: 1.67 kg (with magazine)
- Fully ambidextrous design (bolt handle, mag catch, safety, hop-up adjustment)
- PA6 nylon receiver, glass fiber reinforced
- High Picatinny rail for mask users
- Tapered Aluminium outer barrel
- Barrel length: 330 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 1 barrels spacers
- Magazine capacity: 48 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
- Bolt usable volume: 41 cc
- 6061 T6 aluminium cylinder and cylinder head, grey anodized
- 6061 T6 aluminium piston, red anodized, with 90° piston end (carbon steel)
- PA6 glass fiber reinforced spring guide and bolt end cap.
- APS 13 mm spring compatible, 90 Newton stock spring (may vary depending on countries regulations, please check your retailer website).
- Quick change bolt
- 270 grams
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustment
- Polycarbonate body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
- Fiberglass reinforced Nylon construction
- Picatinny stock attachment
- 3 MLOK slots on each side
- 2 MLOK slots under
- 2 QD points for slings, central position, (optional back QD points, SBA-STK-39)
- Black stock: SBA-BLT-32BK-S
- FDE stock: SBA-BLT-32FDE-S
- Green stock: SBA-BLT-32OD-S
General specs (no stock)
- Length: 651mm
- Weight: 1.36kg (with magazine)
- Reversible feature: right handed/ left handed bolt handle
- Ambidextrous features: magcatch, safety and hop-up adjustment.
Receiver:
- 6000 series CNC Aluminium receiver with unique serial number
- POM sliding rings
- High Picatinny rail for mask users
Barrel:
- Tapered Aluminium outer barrel
- Barrel length: 330 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 3 barrels spacers
Magazine / feeding system:
- Magazine capacity: 48 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
Bolt:
- Bolt usable volume: 41 cc
- Stainless steel cylinder with PVD coating (Aluminium Titanium Nitride Physical Vapor Deposition)
- Stainless steel cylinder head (removable with the tool integrated in cheek pad adjustment knob)
- SRS piston with specific 90° piston end (steel)
- Stainless steel spring guide with thrust bearing
- APS 13 mm spring compatible, 90 Newton stock spring (may vary depending on countries regulations, please check your retailer website).
- Quick change bolt
- 474 grams
Trigger group:
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustment
Hop-up:
- CNC Aluminium body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
Stock:
- Fiberglass reinforced Nylon construction
- Picatinny stock attachment
- 3 MLOK slots on each side
- 2 MLOK slots under
- 2 QD points for slings, central position, (optional back QD points, SBA-STK-39)
Available in 3 colours:
- Black stock: SBA-BLT-32BK
- FDE stock: SBA-BLT-32FDE
- Green stock: SBA-BLT-32OD
- Size: 110 cm minimum
- Minimum weight: 2.4kg with magazine
- Fully ambidextrous design (bolt handle, magcatch, safety, cheekpad adjustment, hop-up adjustment)
- TDC hop-up
- PA6 nylon receiver, glass fiber reinforced
- High Picatinny rail for mask users
- Tapered Aluminium outer barrel
- Barrel length: 510 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 1 barrels spacer
- Magazine capacity: 48 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
- Bolt usable volume: 41 cc
- 6061 T6 aluminium cylinder and cylinder head, grey anodized
- 6061 T6 aluminium piston, red anodized, with 90° piston end (carbon steel)
- PA6 glass fiber reinforced spring guide and bolt end cap.
- APS 13 mm spring compatible, 75 Newton stock spring (may vary depending on countries regulations, please check your retailer website)
- Quick change bolt
- 270 grams
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustment
- Polycarbonate body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
- Fiberglass reinforced Nylon construction
- Quick cheek pad adjustment
- Stock length adjustment: 0/+1/+2/+3 cm out of the box, +4/+5/+6 with optional parts.
- Stainless steel tripod attachment
- 5 MLOK slots on each side
- 2 MLOK slots under
- 4 QD points for slings (front/back on each side)
- Black stock: SBA-BLT-30BK-S
- FDE stock: SBA-BLT-30FDE-S
- Green stock: SBA-BLT-30OD-S
- Wolf Grey stock: SBA-BLT-30WG-S
- Minimum length: 906mm
- Maximum length: 936mm
- Weight: 1.98 kg (with magazine)
- Reversible right handed/ left handed bolt handle.
- Ambidextrous features: magcatch, safety and hop-up adjustment.Receiver:
- PA6 nylon receiver, glass fiber reinforced
- High Picatinny rail for mask users
Barrel:
- Tapered Aluminium outer barrel
- Barrel length: 330 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 1 barrels spacers
Magazine / feeding system:
- Magazine capacity: 48 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
Bolt:
- Bolt usable volume: 41 cc
- 6061 T6 aluminium cylinder and cylinder head, grey anodized
- 6061 T6 aluminium piston, red anodized, with 90° piston end (carbon steel)
- PA6 glass fiber reinforced spring guide and bolt end cap.
- APS 13 mm spring compatible, 90 Newton stock spring pre installed + extra 120 Newton spring included (Installed type spring may vary depending on countries regulations, extra spring type may vary or may not be included depending countries regulations , please check your retailer website for more information).
- Quick change bolt
- 270 grams
Trigger group:
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustmentHop-up:
- Polycarbonate body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
Stock:
- Fiberglass reinforced Nylon construction
- Picatinny stock attachment
- 3 MLOK slots on each side
- 2 MLOK slots under
- 2 QD points for slings, central position, (optional back QD points, SBA-STK-39)
- Size: 110 cm minimum
- Minimum weight: 2.8kg
- Kg (with magazine)
- Fully ambidextrous design (bolt handle, magcatch, safety, cheekpad adjustment, hop-up adjustment)
- 6000 series CNC Aluminium receiver with unique serial number
- POM sliding rings
- High Picatinny rail for mask users
- Tapered Aluminium outer barrel
- Barrel length: 510 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 3 barrels spacers
- Magazine capacity: 48 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
- Bolt usable volume: 41 cc
- Stainless steel cylinder with PVD coating (Aluminium Titanium Nitride Physical Vapor Deposition)
- Stainless steel cylinder head (removable with the tool integrated in cheek pad adjustment knob)
- SRS piston with specific 90° piston end (steel)
- Stainless steel spring guide with thrust bearing
- APS 13 mm spring compatible (75 Newton stock spring, initial muzzle energy around 1.5J, with 0.2g bbs, minimum hop up setting), Warning: Not compatible with SBA-SPR-08 (95 Newton spring).
- Quick change bolt
- 474 grams
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustment
- CNC Aluminium body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
- Fiberglass reinforced Nylon construction
- Quick cheek pad adjustment
- Stock length adjustment: 0/+1/+2/+3 cm out of the box, +4/+5/+6 with optional parts.
- Stainless steel tripod attachment
- 5 MLOK slots on each side
- 2 MLOK slots under
- 4 QD points for slings (front/back on each side)
- Black stock: SBA-BLT-30BK
- FDE stock: SBA-BLT-30FDE
- Green stock: SBA-BLT-30OD
- Wolf Grey stock: SBA-BLT-30WG
- Minimum folded length : 68cm
- Minimum unfolded length : 92cm
- Maximum unfolded length: 102cm
- Minimum weight: 2.8 Kg (with magazine)
- Fully ambidextrous design (bolt handle, magcatch, safety, cheekpad adjustment, hop-up adjustment)
- Full metal chassis (6000 Series aluminium stock and chassis, steel hinges),covered with fiberglass reinforced polymer components.
- Integrated ARCA rail
- 4 MLOK slots on each side
- 3 MLOK slots under
- 2 MLOK slots under the folding stock
- Ambidextrous trigger finger activated safety ( in addition to the original thumb safety)
- Compatible with AR15 type grip (RS/GBB)
- Quick cheek pad vertical and horizontal adjustment
- Quick buttpad vertical adjustment
- Quick stock length adjustment: 10cm
- 6 QD points for slings (front/back on each side)
- 6000 series CNC Aluminium receiver with unique serial number
- POM sliding rings
- High Picatinny rail for mask users
- Tapered Aluminium outer barrel
- Barrel length: 330 mm, 6.05 brass AEG type
- Quick change barrel (bayonet lock + clamp into the receiver)
- M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
- 3 barrels spacers
- Magazine capacity: 110 bbs
- Feeding ramp buffer capacity: 20 bbs
- Quick release button inside the magwell to empty the feeding tube.
- Steel magcatch, AK style.
- Bolt usable volume: 41 cc
- Stainless steel cylinder with PVD coating (Aluminium Titanium Nitride Physical Vapor Deposition)
- Stainless steel cylinder head (removable with the tool integrated in cheek pad adjustment knob)
- SRS piston with specific 90° piston end (steel)
- Stainless steel spring guide with thrust bearing
- APS 13 mm spring compatible (90 Newton stock spring, initial muzzle energy around 1.5J, with 0.2g bbs, minimum hop up setting), Warning: Not compatible with SBA-SPR-08 (95 Newton spring).
- Quick change bolt
- 474 grams
- Stainless steel piston sear
- Stainless steel spring guide stopper
- Stainless steel trigger box
- Steel safety
- 90° piston sear sliding on 2 ball bearings
- Preload adjustment
- Dual stage adjustment
- CNC Aluminium body
- TDC design, can be used no matter the scope used.
- 50 indexed positions (by 15 µm increment)
- AEG hop-up rubber compatible
- 60° hopup rubber AEG
- anti double-feed system
- Black stock: SBA-BLT-31BK
- FDE stock: SBA-BLT-31FDE
- Green stock: SBA-BLT-31OD
- Most Compact TAC-41 Variant
- PA6 Nylon, Glass Fibre Reinforced Polymer Receiver & Chassis
- Picatinny 1913 Stock Mounting Hub
- Intuitive & Tactile Hop-Up Adjustment (Polycarbonate Material for Sports Version)
- 48 Round Capacity
- AEG Spec Hop-Up Bucking & Inner Barrel
- Adaptable Ambidextrous Design
- Free Float Barrel Assembly
- 24mm CW Muzzle Threads
- Comes with Buffer Tube Stock
- Reinforced Nylon Polymer Stock and Buffer Tube Assembly (Milspec)
- Steel QD Points on Both SidesWith the success of the TAC 41 series, this is one of the latest and an even more compact versions of the TAC 41 A. The Silverback TAC-41 LS (Lite Sport) is the much lighter brother of the TAC 41, which focuses on being lightweight and has a much more compact form factor, sporting a shorter barrel with a 330mm inner barrel and a fiberglass-reinforced nylon polymer construction for both the receiver and chassis, with the chassis utilizing a 1913 Picatinny stock mounting hub which allows for a more modular stock setup.Internally, this rifle performs almost the same as its premium counterpart. The trigger is adjustable and is tactile to the touch, while the trigger group is made to be incredibly robust, as the components are made using stainless steel. The bolt action is very smooth, as one would expect from a Silverback Airsoft sniper system. The bolt is CNC machined using high-quality 6061 T6 aluminum and is topped off with a smooth anodized finish. The bolt cylinder is easy to disassemble for routine maintenance, making it very user-friendly. More importantly, the air volume of the cylinder is the same as the bigger Silverback SRS A2 series, meaning that you get an incredibly large volume of air for every shot taken (41cc). This translates to more consistent shots, highly stable power output, and overall less wastage per shot. Pair these with a free float barrel assembly and a redesigned hop-up unit that is highly precise, tactile, and intuitive to adjust on the fly, and this sniper platform is capable of achieving pinpoint accuracy when delivering shots downrange. The barrel is outfitted with a 24mm CW thread and is compatible out of the box with Silverback suppressor units.The hop-up unit (polycarbonate material for Sports version) uses the same TDC adjustment design with 50 index positions for precise tuning with all BB weights, and the hop-up bucking is an AEG spec 60-degree rubber, making it highly customizable with other brands of AEG buckings on the market. The rifle has an impressive 48-round magazine, which works in tandem with the unique feed ramp design of the TAC-41 that captures all BB that are pre-loaded and will not drop BBs out when removing the magazine unless the feed-ramp release button is pressed, making this design extremely efficient and clean.This particular package includes the Silverback 1913 Picatinny buffer tube stock assembly, which is made using the same durable fiberglass-reinforced nylon polymer material as the chassis. This maintains a balanced yet lightweight overall setup while giving the user the ability to use standard M4-style stocks. The buffer tube is Mil-Spec dimensions for optimal stock compatibility and features 2 steel QD points on both sides.
- Most Compact TAC-41 Variant
- Lightweight Sports Version
- PA6 Nylon, Glass Fibre Reinforced Polymer Receiver & Chassis
- Picatinny 1913 Stock Mounting Hub
- Intuitive & Tactile Hop-Up Adjustment (polycarbonate material for Sports version)
- 48 Round Capacity
- AEG Spec Hop-Up Bucking & Inner Barrel
- Adaptable Ambidextrous Design
- Free Float Barrel Assembly
- 24mm CW Muzzle Threads
- Comes with Precision Focused Marksman Aluminium Stock with Fibreglass Reinforced Nylon Furniture
- NBR Buttpad
- Steel QD Points on Both Sides
- 2 MLOK Slots Under the Stock (For Monopod)
- Adjustable Stock Length, Butt Pad Height, Cheek Rest Position & Height
- x1 TAC 41 Rifle (Sports)
- x1 Aluminum Stock
- x1 M120 Spring
- x1 Manual
Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.
