- All categories
Welcome to Airsoft Wholesale UK
Main menu
Airsoft Guns
- Airsoft Guns
-
HPA - High Pressure Air Airsoft Guns
-
Other Airsoft Weapon Categories
-
RIFs by Power Type
Airsoft Magazines
Weapon Accessories
- Weapon Accessories
-
Grips & Bipods
-
Torches & Lasers
Parts and Upgrades
- Parts and Upgrades
-
AEG Parts and Upgrades
- AEG Parts and Upgrades
- AEG Motors
- Barrels - AEG
- AEG Cylinders
- AEG Cylinder Heads
- AEG Gear Sets
- AEG Gearboxes
- AEG Gearbox Shells & Screws
- AEG Gearbox Small Parts
- Mosfets & ETUs
- AEG Hop Buckings
- AEG Hop Nubs & Tensioners
- AEG Hop-Up Chambers
- AEG Pinion Gears
- AEG Pistons
- AEG Piston Heads
- AEG Nozzles
- AEG Springs
- AEG Spring Guides
- AEG Triggers
- Bearings and Shims
- Sector Gears & Delay Chips
- Selector Plates
- Tappet Plates
- Wiring & Switch Assemblies
-
GBBR Parts and Upgrades
- GBBR Parts and Upgrades
- Gas Blowback Rifle Parts
- GBBR Bolts & Bolt Carriers
- GBBR Buffers & Recoil Weights
- GBBR Hop Buckings
- GBBR Hop Nubs
- GBBR Hop-Up Chambers
- GBBR Inner Barrels
- GBBR Magazine Parts
- GBBR Nozzles
- GBBR NPAS & Valves
- GBBR Trigger Boxes & Fire Control
- GHK Spare Parts
- MWS Parts & Accessories
- Tokyo Marui GBB Parts
-
Sniper Parts and Upgrades
- Sniper Parts and Upgrades
- Shop All Sniper Upgrades
- Rifle Scopes
- Sniper Bolt Handles
- Sniper Chassis & Stocks
- Sniper Cylinders
- Sniper Cylinder Heads
- Sniper Hop Buckings
- Sniper Hop Nubs
- Sniper Hop-Up Chambers & Units
- Sniper Inner Barrels
- Sniper Outer Barrels
- Sniper Mag Catches
- Sniper Pistons
- Sniper Piston Heads
- Sniper Rails
- Sniper Spare Parts & Fixings
- Sniper Springs & Power Rings
- Sniper Spring Guides
- Sniper TDC Kits & Hop Arms
- Sniper Trigger Groups & Sears
- VSR Upgrades
- Silverback SRS Upgrades
- All Silverback Parts & Upgrades
- Silverback VKS Parts & Upgrades
-
Pistol Parts and Upgrades
- Pistol Parts and Upgrades
- Pistol Blowback Units & Piston Heads
- Pistol Charging & Cocking Handles
- Pistol Compensators
- Pistol Fire Control Parts
- Pistol Frames
- Pistol Grips & Grip Panels
- Pistol Guide Rods
- Pistol Hammers
- Pistol Hammer Springs
- Pistol Hop-Up Chambers & TDC
- Pistol Inner Barrels
- Pistol Loading Nozzles
- Pistol Magwells
- Pistol Magazine Base Plates
- Pistol Magazine Parts
- Pistol Mag Releases
- Pistol Nozzle Springs
- Pistol Outer Barrels
- Pistol Recoil Springs
- Pistol Safeties
- Pistol Seals, O-Rings & Small Parts
- Pistol Sights & Fibre Optics
- Pistol Slide Stops
- Pistol Triggers
- Pistol Valves & Valve Knockers
- AAP-01 Upgrades
- AAP-01 Uppers & Conversion Kits
- Hi-Capa Upgrades
- MK23 Upgrades
-
Tool Kits
Clothing & Gear
- Clothing & Gear
-
Chest Rigs & Plate Carriers
-
Eye and Face Protection
Consumables
Brands
- Brands
-
I
Info
Your cart
Airsoft Pistol Charging & Cocking Handles
14 products
14 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
2 Colours available: Silver & Black
For TM G19
Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different.
Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used. G19 Tactical Cocking Handle replaces the existing the “Rear Slide End Cap” for TM G19 and makes racking the slide, reloading, or clearing malfunctions easier with either one or two hands.
It is made of 6061 Aluminum and CNC machined for a true fit. Whether you're using two hands to rack your slide or only able to use one. G19 Tactical Cocking Handle increases the reliability of racking your slide.
Highlighted features:
6061 Aluminium with CNC machined
Enhances overall grip on the slide
Maximizes One hand Reloads, Malfunctions
Allows for quicker reloading manipulation
3 Colours available: Silver, Black & Gold
For standard slide and stock TM slide (CCT-TMHC-094 to 105)
For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installaton Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
Highlighted features:
6061 Aluminium with CNC machined
Enhances overall grip on the slide
Maximizes One hand Reloads, Malfunctions
Allows for quicker reloading manipulation
3 Colours available: Silver, Black & Gold
For standard slide and stock TM slide (CCT-TMHC-094 to 105)
For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installaton Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
Highlighted features:
6061 Aluminium with CNC machined
Enhances overall grip on the slide
Maximizes One hand Reloads, Malfunctions
Allows for quicker reloading manipulation
3 Colours available: Silver, Black & Gold
For standard slide and stock TM slide (CCT-TMHC-094 to 105)
For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installaton Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
Highlighted features:
6061 Aluminium with CNC machined
Enhances overall grip on the slide
Maximizes One hand Reloads, Malfunctions
Allows for quicker reloading manipulation
3 Colours available: Silver, Black & Gold
For standard slide and stock TM slide (CCT-TMHC-094 to 105)
For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installaton Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
Highlighted features:
6061 Aluminium with CNC machined
Enhances overall grip on the slide
Maximizes One hand Reloads, Malfunctions
Allows for quicker reloading manipulation
3 Colours available: Silver, Black & Gold
For standard slide and stock TM slide (CCT-TMHC-094 to 105)
For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installaton Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
Highlighted features
- 6061 Aluminum with CNC machined
- Enhances overall grip on the slide
- Maximizes One hand Reloads, Malfunctions
- Allows for quicker reloading manipulation
- 3 Colors available: Silver, Black & Gold
- For standard slide and stock TM slide (CCT-TMHC-094 to 105)
- For TM Hi-Capa
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Attention & Installation Guide:
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
2 Colours available: Silver & Black
For TM G19
Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation/fitting. Fitting may be needed as the condition of each airsoft gun might be different.
Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising.
Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used. G19 Tactical Cocking Handle replaces the existing the “Rear Slide End Cap” for TM G19 and makes racking the slide, reloading, or clearing malfunctions easier with either one or two hands.
It is made of 6061 Aluminum and CNC machined for a true fit. Whether you're using two hands to rack your slide or only able to use one. G19 Tactical Cocking Handle increases the reliability of racking your slide.
Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.
