Electric Airsoft guns (AEG)

Overall Length: 670mm/570mm (Stock Folded)

Weight: 2600g (Including Battery)

Barrel Length: 130mm

Magazine Capacity: 100rds

Velocity: 270-300FPS (use 0.2g 6mm BB bullet)

JG AK47 with Real Wood and full stock 

As with all China brand guns please check for Site limits while we try to provide 350 fps or below some may need to be downgraded by the retailer.

German H&K's famous submachine gun, equipped with a fixed stock as standard.

"MP5 A4" equipped with a fixed stock is now available in the MP5 series of next-generation electric guns! Equipped with the highly safe "M-SYSTEM," which uses FET (electronic trigger system) and comprehensively monitors and controls the FET, FC, battery, and motor using a microcomputer. This model reproduces 3 bursts, improves trigger response, supports MS Li-Po batteries, and thoroughly pursues realism in its exterior and operability.

Major features

• Equipped with shoot & recoil engine By pulling the trigger, a bolt-like weight of approximately 300g is activated at the same time as the gun is fired, and the intense recoil generated inside the main body is transmitted throughout the body. It is also equipped with an auto-stop system that stops firing when the magazine is empty, and a bolt release mechanism that releases the auto-stop by pulling the bolt handle. This model pursues the reality of operation and operability.

• Reproduce 3 bursts In addition to semi/full auto firing, it perfectly reproduces 3 burst firing that fires 3 shots when you pull the trigger. The selector, which can be operated from either the left or right, is linked by a shaft that passes through the mechanical box, achieving smooth rotation and a solid click feeling.

• Equipped with FET Equipped with FET (electronic switch) instead of conventional mechanical switch. Compared to mechanical switches, the current loss that occurs at the contact point is reduced, and the response from pulling the trigger to firing the BB bullet is improved.

• M-SYSTEM We have newly developed "M-SYSTEM," a microcomputer (MCU = microcontroller unit) that comprehensively monitors and controls FET, FC (Fire Control), battery, and motor. It not only monitors information from seven sensors and various voltages to switch shooting modes and control motor rotation, but also has safety features such as detecting damage or abnormalities in various parts and stopping operation. It has become a system.

• Pursuing the reproducibility of appearance Many metal parts, such as the upper receiver, are powder-coated with a texture that is close to the real thing. In addition, the hand guard, lower receiver, fixed stock, selector, and cocking lever are molded from reinforced nylon resin, which is similar to the real material.

• Increased rigidity in various parts By reviewing the component structure of the cocking handle and adopting reinforced nylon resin, it is possible to hit the locked cocking lever to return it, commonly known as "HK slap." In addition, the fixed stock is integrally molded for increased realism and rigidity.

• Adjustable rear sight The drum type rear sight allows you to adjust the top and bottom of the impact with the included rear sight adjustment tool, and the left and right of the impact with a Phillips screwdriver (*), just like the real thing. *Phillips screwdriver not included. Please prepare separately.

• Realistic pressed magazine The number of bullets is 72. Comes with a magazine that uses a pressed steel outer case with welded seams all around, just like the real thing. *Magazine is not compatible with other series MP5 models such as electric gun standard type.

• E-Bolt System Electric Blowback AEG, Simulated bolt carrier movement
• E-shooter Programmable MOSFET
• Steel bolt carrier, Steel gear set, High torque motor
• Main Material: Aluminium, Metal Alloy, Polymer
• Magazine Capacity : 300 Rounds 6mm BB
• Overall Length: 540-610 mm
• System: Electric Blowback,
• Adjustable Hop-Up
• Gearbox: ETU MOSFET / 8mm Bearing Metal Gearbox
• Power Source : T-Plug 11.1v Li-po Recommended ( Not Include )
• Fire Mode: Semi-Auto / Full-Auto / Safety
• Muzzle Velocity: Approx. 330 Fps with 0.2G BBNote: Please make sure bolt is fully forward in use, if half pulled back it can cause issues with gears (please view video below
• [video width="848" height="480" mp4="https://www.airsoftwholesaleuk.com/wp-content/uploads/2026/04/WhatsApp-Video-2026-03-23-at-15.00.58.mp4"][/video]

• Equipped with shoot & recoil engine By pulling the trigger, a 300g weight imitating a bolt is activated at the same time as the gun is fired, and the intense recoil generated inside the main body is transmitted throughout the body. It is also equipped with an auto-stop system that stops firing when the magazine is empty, and a bolt release mechanism that releases the auto-stop by pulling the bolt handle. This model pursues the reality of operation and operability.

• Reproduce 3 bursts In addition to semi/full auto firing, it perfectly reproduces 3 burst firing that fires 3 shots when you pull the trigger. The selector, which can be operated from either the left or right, is linked by a shaft that passes through the mechanical box, achieving smooth rotation and a solid click feeling.

• Equipped with FET Equipped with FET (electronic switch) instead of conventional mechanical switch. Compared to mechanical switches, there is less current loss generated at the contact point, and the response from pulling the trigger to firing the BB bullet is improved.

• M-SYSTEM We have newly developed "M-SYSTEM," a microcomputer (MCU = microcontroller unit) that comprehensively monitors and controls FET, FC (Fire Control), battery, and motor. It not only monitors information from seven sensors and various voltages to switch shooting modes and control motor rotation, but also has safety features such as detecting damage or abnormalities in various parts and stopping operation. It has become a system.

• Silencer standard equipment The aluminum-cut silencer reproduces the rough textured finish. Internal sound-absorbing material reduces firing sound. Also, by removing the silencer, you can install a 14mm reverse threaded muzzle option.

• Pursuing the reproducibility of appearance Many metal parts, such as the upper receiver, are powder-coated with a texture that is close to the real thing. The hand guard is made of a resin material with a rubber-like texture, and the lower receiver, butt plate, selector, and cocking lever are molded from reinforced nylon resin, which is similar to the real material.

• Increased rigidity in various parts By reviewing the component structure of the cocking handle and adopting reinforced nylon resin, it is possible to hit the locked cocking lever to return it, commonly known as "HK slap." In addition, the sliding retractable stock has a new structure, making it more realistic and rigid.

• Realistic pressed magazine The number of bullets is 72. Comes with a magazine that uses a pressed steel outer case with welded seams all around, just like the real thing. *Magazine is not compatible with other series MP5 models such as electric gun standard type.

Major features

• Equipped with shoot & recoil engine By pulling the trigger, the bolt operates at the same time as firing, and the strong recoil generated inside the main body is transmitted to the whole body. In addition, an auto stop system is used to stop the firing operation when the magazine is empty. It is a model that pursues the reality of operation and operability.

• Bolt release mechanism Equipped with a bolt release mechanism that releases the auto stop by pulling the bolt handle. You can enjoy realistic operation procedures.

• Uses metal parts Die-casting and pressed steel are used for the parts of each part, including the lower receiver, to create a profound feeling that moves to the eyes and a feeling of weight when picked up, and also achieves high rigidity. The lower receiver has a deflick coat to reproduce the texture of the steel black dyeing process.

• M-LOK rail system The latest rail system "M-LOK" is used on both sides of the hand guard with underrail. The hand guard, which allows you to add rails only where you need it, is slim and easy to handle, and has been lightened by lightening. The 20mm wide (Picatinny standard) M-LOK rail comes with 3 types of 3 slots, 5 slots, and 7 slots. It can be easily attached and detached with the included hexagon wrench.

• Various accessory parts It comes with two types of M-LOK covers, two types of hand stops that support the hand holding the hand guard, and a dedicated mount that allows you to attach the separately sold "Micro Prosite" at a lower position.

• Compatible with various muzzle options If you remove the flash hider of the muzzle, you can install a muffler option with 14 mm reverse screw specifications such as a silencer.

• Steel press magazine Comes with a magazine that has 90 bullets and uses a steel press outer case similar to the real one. Equipped with a built-in follower stopper, it is also possible to enjoy only the firing operation without putting a BB bullet in the magazine. * The magazine is not compatible with the AK74 magazine.

• Magazine adapter included By attaching an adapter to the main body, you can use the magazine for electric gun standard type AK. * When the adapter is attached, the auto stop system and bolt release mechanism will not operate. In addition, the magazine for the next-generation electric gun AK47 cannot be used.