Electric SMGs

Overall Length: 670mm/570mm (Stock Folded)

Weight: 2600g (Including Battery)

Barrel Length: 130mm

Magazine Capacity: 100rds

Velocity: 270-300FPS (use 0.2g 6mm BB bullet)

German H&K's famous submachine gun, equipped with a fixed stock as standard.

"MP5 A4" equipped with a fixed stock is now available in the MP5 series of next-generation electric guns! Equipped with the highly safe "M-SYSTEM," which uses FET (electronic trigger system) and comprehensively monitors and controls the FET, FC, battery, and motor using a microcomputer. This model reproduces 3 bursts, improves trigger response, supports MS Li-Po batteries, and thoroughly pursues realism in its exterior and operability.

Major features

• Equipped with shoot & recoil engine By pulling the trigger, a bolt-like weight of approximately 300g is activated at the same time as the gun is fired, and the intense recoil generated inside the main body is transmitted throughout the body. It is also equipped with an auto-stop system that stops firing when the magazine is empty, and a bolt release mechanism that releases the auto-stop by pulling the bolt handle. This model pursues the reality of operation and operability.

• Reproduce 3 bursts In addition to semi/full auto firing, it perfectly reproduces 3 burst firing that fires 3 shots when you pull the trigger. The selector, which can be operated from either the left or right, is linked by a shaft that passes through the mechanical box, achieving smooth rotation and a solid click feeling.

• Equipped with FET Equipped with FET (electronic switch) instead of conventional mechanical switch. Compared to mechanical switches, the current loss that occurs at the contact point is reduced, and the response from pulling the trigger to firing the BB bullet is improved.

• M-SYSTEM We have newly developed "M-SYSTEM," a microcomputer (MCU = microcontroller unit) that comprehensively monitors and controls FET, FC (Fire Control), battery, and motor. It not only monitors information from seven sensors and various voltages to switch shooting modes and control motor rotation, but also has safety features such as detecting damage or abnormalities in various parts and stopping operation. It has become a system.

• Pursuing the reproducibility of appearance Many metal parts, such as the upper receiver, are powder-coated with a texture that is close to the real thing. In addition, the hand guard, lower receiver, fixed stock, selector, and cocking lever are molded from reinforced nylon resin, which is similar to the real material.

• Increased rigidity in various parts By reviewing the component structure of the cocking handle and adopting reinforced nylon resin, it is possible to hit the locked cocking lever to return it, commonly known as "HK slap." In addition, the fixed stock is integrally molded for increased realism and rigidity.

• Adjustable rear sight The drum type rear sight allows you to adjust the top and bottom of the impact with the included rear sight adjustment tool, and the left and right of the impact with a Phillips screwdriver (*), just like the real thing. *Phillips screwdriver not included. Please prepare separately.

• Realistic pressed magazine The number of bullets is 72. Comes with a magazine that uses a pressed steel outer case with welded seams all around, just like the real thing. *Magazine is not compatible with other series MP5 models such as electric gun standard type.

• Equipped with shoot & recoil engine By pulling the trigger, a 300g weight imitating a bolt is activated at the same time as the gun is fired, and the intense recoil generated inside the main body is transmitted throughout the body. It is also equipped with an auto-stop system that stops firing when the magazine is empty, and a bolt release mechanism that releases the auto-stop by pulling the bolt handle. This model pursues the reality of operation and operability.

• Reproduce 3 bursts In addition to semi/full auto firing, it perfectly reproduces 3 burst firing that fires 3 shots when you pull the trigger. The selector, which can be operated from either the left or right, is linked by a shaft that passes through the mechanical box, achieving smooth rotation and a solid click feeling.

• Equipped with FET Equipped with FET (electronic switch) instead of conventional mechanical switch. Compared to mechanical switches, there is less current loss generated at the contact point, and the response from pulling the trigger to firing the BB bullet is improved.

• M-SYSTEM We have newly developed "M-SYSTEM," a microcomputer (MCU = microcontroller unit) that comprehensively monitors and controls FET, FC (Fire Control), battery, and motor. It not only monitors information from seven sensors and various voltages to switch shooting modes and control motor rotation, but also has safety features such as detecting damage or abnormalities in various parts and stopping operation. It has become a system.

• Silencer standard equipment The aluminum-cut silencer reproduces the rough textured finish. Internal sound-absorbing material reduces firing sound. Also, by removing the silencer, you can install a 14mm reverse threaded muzzle option.

• Pursuing the reproducibility of appearance Many metal parts, such as the upper receiver, are powder-coated with a texture that is close to the real thing. The hand guard is made of a resin material with a rubber-like texture, and the lower receiver, butt plate, selector, and cocking lever are molded from reinforced nylon resin, which is similar to the real material.

• Increased rigidity in various parts By reviewing the component structure of the cocking handle and adopting reinforced nylon resin, it is possible to hit the locked cocking lever to return it, commonly known as "HK slap." In addition, the sliding retractable stock has a new structure, making it more realistic and rigid.

• Realistic pressed magazine The number of bullets is 72. Comes with a magazine that uses a pressed steel outer case with welded seams all around, just like the real thing. *Magazine is not compatible with other series MP5 models such as electric gun standard type.

S&T Sterling Mk7 

RUGGED STAMPED & WELDED STEEL RECEIVER
STUBBY CQB TYPE MID-CAP STEEL MAGAZINE
FULL METAL LIPO READY 9MM GEARBOX

The barrel extension and suppressor are NOT included in the box. It comes with a tactical 20mm rail on top to attach a sight or scope.

• Thorough reproduction supervised by the original author The product was supervised by both the original author Keiichi Sigsawa and Kouji Akimoto, who assisted with the gun design. The frame is molded in a special pink color and painted to recreate the texture seen in the series. The magazine outer is also molded in a special clear pink, and the see-through dummy cartridge has a black bullet tip, making it a product that matches the anime.

• A variety of luxurious benefits It comes with a short story written by Keiichi Sigsawa, a cloth poster with a newly drawn illustration, and a BB loader molded in the same clear pink as the magazine outer. The package is a special package with a newly drawn illustration.

• Equipped with FET Equipped with a switch that combines mechanical and FET. Compared to a mechanical switch only, there is less current loss at the contacts, improving the response from pulling the trigger to firing the BB bullet. The durability of the switch part has also been improved.

• PLUS System We developed the "PLUS System" in which a microcontroller unit (MCU) comprehensively monitors and controls the FET, battery, and motor. This system not only controls the rotation of the motor, but also detects any damage or abnormality in each part and stops operation, making it a safe system.

• Reproduce the unique structure It can be disassembled into three parts: the mechanism covered by the stock with integrated grip, the barrel unitized with the sight receiver, and the magazine. It reproduces the same takedown as the real thing.

• Realistic selector mechanism The trigger finger can be used to operate the selector, allowing you to switch firing modes without losing your stance. Also, if the selector is in the full auto position, you can switch between semi-auto and full auto by pulling the trigger for as long as you want.

• Side mount rail equipped A mounting rail is installed on the right side of the sight receiver that supports the red dot sight. A flashlight or other equipment compatible with 20mm rails can be attached.

• Clear pink magazine

Tokyo Marui Mac 10  AEP