Upgrade / Spare parts

Perun for Krytac Kriss Vector replaces stock electronics in Kriss Vector airsoft replicas made by Krytac company. It provides lots of additional features, including active braking and full cycle control (making sure that each cycle is finished, even if the trigger is pulled very briefly).

Feature description

Freely programmable firing modes – Set any firing mode you like on any of the selector positions independently. Available modes are: safe, semi, binary, 2 to 5 round burst and auto.
Active brake - active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).
Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull and hold the trigger. A second shot will be fired after 3 seconds, with no precocking and fully braked.
Rate of fire reduction - Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion.
Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off.
Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.
Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery if a short circuit or blocked motor is detected.

Programming of all the settings is done solely by using trigger and selector, in an easily memorable and quick sequence. Programming is supported by sound signals and multicolor LED diode. That allows changing the settings in any moment, in a matter of seconds, even under enemy fire.
Perun for Krytac Kriss Vector works without problems with any battery from 7V do 17V. It can also be used with most extreme setups, without any limitations as to the spring rating.

Manual download here 

• High-power UV LED technology
• 11 different modes available for the multi-colour flame function
• Shake to wake with beep confirmation
• IP65 (dust-tight and rain protected)
• Lithium battery rated up to 20,000 rounds
• Flash speeds of up to 35 rounds per second / 2100 RPM
• Integrated motion sensor inside
• Battery level indicator with idle power save mode
• USB type C charging - no more batteries!!
• For use with Green BBs

• Brass
• Diameter: 30mm
• Length: 81mm
• Threads: 11mm CW & 14mm CCW
• Weight: 61g
• CNC Aluminium construction

• 6061 aluminum construction for long-lasting performance.
• The aluminum alloy surface is anodized with a bronze finish to enhance corrosion resistance, increase hardness, and improve wear resistance.
• Precision stepless Hop adjustment (0~2mm) for exceptional accuracy.
• Front double O-ring seal ensures consistent performance.
• Includes 4-Way Adaptive Hop-Up Nub with two hardness options (70°and 80°).
• The 4-Way Adaptive Hop-Up Nub can be used in four directions. It combines flexibility, precision, and customization in one innovative design. Whether you're shooting for accuracy, range, or adapting to diverse conditions, this nub ensures your rifle performs at its best. Choose your hardness, tweak your setup, and experience next-level precision.
• Easy installation with minimal modification required.
• For Tokyo Marui M4 MWS Airsoft Gas Blowback Rifles.

• • • Explosion Diagram number: 05-5
    • Improved V2 injection valve: no more losing O-ring.

• Durable rubber construction
• Drop-in design requires little to no modification
• Explosion Diagram number: MAGAZINE-4
• Compatibility: Tokyo Marui MWS Gas Blowback Rifles

• Explosion Diagram number: MAGAZINE-2
• Compatibility: Tokyo Marui MWS Gas Blowback Rifles

A tighter gas seal The Flux Core spring works in both directions, pushing and pulling. Once fitted, it holds the nozzle slightly forward, keeping it pressed against the bucking right up until the shot. That minimises gas leaking past the BB, so more of each shot's gas goes into firing it.

Reliable feeding, stable cycling In the last part of the bolt carrier's forward travel, the spring helps the nozzle push the BB firmly into the chamber, for more reliable feeding and more stable cycling. RHD spent two years field-testing and gathering data on the Flux Core design before release. The Flux Core nozzle is for GBBR owners who want more consistent performance from their rifle, as a drop-in replacement for the stock nozzle. Browse our gas blowback rifle parts and the rest of the RHD range.

Specifications

• Compatibility:
  • VFC LAR (FAL/SA58) GBB series
  • APFG MCX and Spear LT GBB
  • Maruyama ISO556 GBB
• Not compatible with:
  • APFG MPX GBB
  • APFG XM7 GBB
• Spring fixing: Screw (bolt-lock)
• Type: Complete polymer loading nozzle with Flux Core return spring and adjustable flow valve (NPAS)
• Length: Approx. 97mm
• Materials: Polymer, steel and aluminium alloy
• In the box: 1 loading nozzle assembly