Uncategorised

Perun

Perun V2 Lightning ETU (Front or Back Wired)

Perun V2 Lightning replaces the mechanical contacts in your airsoft replica or gel blaster, introducing a wide range of useful features. Optical and magnetic sensors eliminate moving parts entirely, providing exceptional reliability and flexibility—working with almost any combination of gearbox shells, triggers, selector plates, and sector gears. Adaptive trigger control lets you adjust from a very short to a long trigger travel, even in the field, using almost any trigger, including stock ones Works without modification in most V2 gearboxes in Tokyo Marui standard. Compatible with both brushed and brushless (BLDC) motors. Designed to work with Perun’s full range of V2 trigger accessories: Clicker V2, Clicker V2 PRO, and Speeder V2, making it the foundation of a fully custom trigger setup. For details and exceptions, please refer to the manual.

Adjustable trigger sensitivity – Perun V2 Lightning offers the highest out-of-the-box trigger sensitivity of any Perun product to date. No modification to the trigger or gearbox is needed—the sensitivity can be adjusted at any time, even in the field, to suit your preference and play style. Active brake – active brake stops the motor after each shot, preventing the spring from remaining compressed and eliminating overspin (double-shot problem) in high-ROF replicas. Braking strength is adjustable, and the brake can also be turned off entirely. Active brake and precocking settings are independent of each other. Precocking – with precocking enabled, the piston stays in the rear position after each shot with the spring already compressed, so the next shot fires the instant you pull the trigger—a critical advantage in CQB situations. Precocking strength is adjustable and automatically adapts to the current battery voltage, so the piston always lands in the right spot regardless of your battery’s state of charge. Active brake and precocking settings are independent of each other. To release the spring safely after using precocking, switch to semi, fire one shot, and hold the trigger: a second shot with maximum active brake will fire after 3 seconds, leaving the spring uncompressed. 2-stage trigger – a light trigger pull fires in one mode; a deeper pull switches to another. Available combinations are semi–burst, semi–auto, and burst–auto.

Compatibility and installation

Perun V2 Lightning comes with a proprietary selector plate that fits most AR-type replicas straight out of the box. For replicas with non-standard selector plates, the package includes a special magnet with double-sided tape and a positioning tool, making installation straightforward without the need for permanent modifications. The selector can be easily calibrated after installation to ensure precise position detection. The selector sensor uses a magnetic Hall-effect design and is completely unaffected by ambient light, so it works without any issues in replicas with cut-out receivers. Works without modification in most V2 gearboxes in Tokyo Marui standard. Compatible with brushed and brushless motors, all gearsets including DSG, and batteries from 7 V to 17 V. For the full compatibility list and exceptions, please refer to the manual.

Compatible with both traditional brushed and brushless (BLDC) motors.

Programming

All settings are configured by quick, easily memorized sequences of selector switching and trigger pulls, guided by sound signals and a multicolour LED. No tools or apps required. Settings for SEMI and AUTO are independent and can be changed in seconds, even in the field.

Safety

Low battery voltage alarm – alerts you with repeated sound signals when the battery voltage drops to a level at which it should no longer be used. The unit automatically detects the number of cells and sets the threshold accordingly. Can be disabled for non-Li-Po/Li-Ion batteries.

Diagnostic system – continuously monitors the replica and the unit itself. If a problem occurs—whether a blocked motor, overheating, short circuit, or sensor fault—the LED signals the specific issue immediately, making troubleshooting fast and straightforward.

Electronic resettable fuse – automatically cuts power in the event of a short circuit or gearbox jam, protecting both the replica and the battery. Resets when the battery is reconnected and the fault is resolved—no part replacement needed.

In stock

Pro-Arms

Pro-Arms TM MP7 GBB Steel Back Plate (MGG1-15)

In stock

FMA ops core Helmet Suspension Chin Extender Strap - Tan

FMA

FMA ops core Helmet Suspension Chin Extender Strap -Black

In stock

Strike TW

Strike Airsoft 3/8-24UNF Burst Disk - 5k PSI

In stock

Amass

AMASS 40am Deans / T Plug. 5x Male 5x Female

In stock

PolarStar

PolarStar Complete Seal Set (Micro Regulator)

In stock

PolarStar

PolarStar Kythera SA Complete O-Ring Set

In stock

The Patch Board

TPB SAS Who Dares Wins Patch Green & Tan

In stock

4UANTUM

Saturday Delivery upgrade

In stock

Airsoft Wholesale UK

PolarStar Jack HPA Engine (V3-AK)

The JACK™ was designed to answer the demand for an affordable, high performance HPA (High Pressure Air) conversion for AEG's. The system is a drop-in cylinder replacement that is universally compatible with a wide range of gearbox versions that have center-line nozzles. PolarStar Filter Fitting now included! Similar to its sister products, the JACK™ replaces the original gearbox components with a programmable pneumatic system allowing for higher performance and greater reliability over a gear driven system. Although economically priced, the JACK™ still retains the same performance and quality you have come to expect from PolarStar products. The JACK™ has only one moving part, the nozzle, which acts as its own poppet valve. Similar to the Fusion Engine™ and F2™ poppet, the nozzle is only piloted by the solenoid to open air flow through the poppet with none of the firing air coming from the solenoid itself. This design lets the JACK™ send a higher flow of air down the barrel than systems that only use a solenoid as the firing valve. Gel Ball Compatible JACK HPA conversion kits can also be configured for use in gel ball systems.

Velocity: 500fps w/ .20g @ 130psi

The JACK™ allows for easy velocity adjustment by changing input pressure and does not require different nozzles to reach its full velocity range. Using a standard M4 as an example, velocity can be adjusted from below 280fps and up to approximately 500fps with a .20g BB. Velocity can vary per model as longer barrels will increase the maximum velocity while shorter barrels will decrease it.

ROF: 30rps

The maximum cyclic rate of the JACK™ is affected by several factors such as the operating pressure as well as quality of the magazine and BB's used. However, 30 rounds per second is achievable in most standard configurations.

Air Efficiency: 1000+ shots from 13/3000 @ 1.5J w/ .28g

Although not a critical requirement during development, JACK™ does boast some highly respectable figures in this category. This is made possible by its intelligently laid out design which minimizes dead volume resulting in better air flow, faster response and less air used per shot.

(Test Configuration: 6.05x375mm Barrel)

**All kits come with a Filter Fitting installed, FCU, Switchboard, Wire Harness and any additional components needed to convert the specific airsoft rifle model for which the kit is configured. The HPA Tank, Air Rig (regulator and line) and Battery needed to operate the system are purchased separately.**

Out of stock