Silverback Airsoft

SRS-A2/M2 22’’ For right-handed shooters   The Silverback SRS-A2 22” is our licensed version of the Desert Tech Scout Recon Stealth A2 bullpup sniper rifle, latest model of the SRS line.   The SRS monolithic receiver, made of aeronautical grade aluminium, by CNC, features the new patented barrel mount by Desert Tech, that more uniformly clamps onto the barrel and reduces peak stress points. SRS-A2 receivers are highly lightened, participating actively to the mass reduction. Each receiver has a unique engraved serial number. The handguard (CNC, aeronautical grade aluminium) is using MLOK attachment system, and include 4 QD points. SRS A2 receiver features a stainless-steel attachment point for tripod (1/4-20 UNC thread). SRS A2 receiver is compatible with the replica of the Desert Tech monopod (patented). Top rail is detachable , allowing use of multiple optional alternatives, including M2 type rails.   SRS pull bolt air displacement is 41 cc, the second largest volume for bolt action on the market after our HTI. This bolt can accept any APS 13 mm springs. Stock spring type and muzzle energy may differ from one country to another, please check directly with your retailer. The cylinder is made of stainless steel (23.8 mm bore), and the monolithic bolt handle is made of steel, equipped with M8 bolt knob. The piston has an aeronautical grade aluminium body and head, a steel piston end, and a 70° synthetic rubber piston cup. The spring guide is made of fiber glass reinforced Nylon, it’s equipped with 2 dampening orings and a thrust bearing. The bolt dust cover is perforated, and the red piston is acting as a priming indicator.   The piston sear is made of steel, and the aluminium trigger is adjustable in preload. The trigger housing is made of fiber glass reinforced Nylon. The piston sear height can be adjusted by moving the trigger box forward or backward. The steel safety is ambidextrous.   Outer barrel (CNC, aeronautical grade aluminium) is very deeply fluted and threaded (M14x1 CCW thread). It’s equipped with .308 QD muzzle brake (SBA-FHD-06). Proper timing of the muzzle brake is compulsory when used with QD DTSS suppressor replica. Inner barrel (6.05 x 578 mm, brass) and hop-up rubber (silicone 60°) are of AEG type.   The two-way CNC aluminium hop-up unit, directly attached to the quick-change barrel assembly, is allowing barrel switch in seconds while keeping your hop up setting. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel. Hop-up can alternatively be used with two larger setting screws at the cost of quick-change keeping hop setting ability.   Stock and butt pad extensions (two included) are made of fiberglass-reinforced Nylon.   Steel magazine has a 30 rounds capacity and it’s compatible with soft follower (included).   No zinc alloy, all screws are in 10.9 steel.   Colours available: Black/FDE/OD. Minimum length: 865 mm. Mass without magazine: 2.525 Kg.   Black: SBA-BLT-12BK FDE: SBA-BLT-12FDE OD: SBA-BLT-12OD

SRS A2/M2 Sport 16’’ For right-handed shooters.   The Silverback SRS-A2 Sport 16” is our licensed version of the Desert Tech Scout Recon Stealth A2 bullpup sniper rifle, latest model of the SRS line.   The SRS monolithic receiver, made of aeronautical grade aluminium, by CNC, features the new patented barrel mount by Desert Tech, that more uniformly clamps onto the barrel and reduces peak stress points. SRS-A2 receivers are highly lightened, participating actively to the mass reduction. Each receiver has a unique engraved serial number. The lightweight fiber glass reinforced handguard is using MLOK attachment system. SRS A2 receiver features a stainless-steel attachment point for tripod (1/4-20 UNC thread). SRS A2 receiver is compatible with the replica of the Desert Tech monopod (patented). Top rail is detachable , allowing use of multiple optional alternatives, including M2 type rails.   SRS bolt air displacement is 41 cc, it can accept any APS 13 mm springs. Stock spring type and muzzle energy may differ from one country to another, please check directly with your retailer. The cylinder is made of stainless steel (23.8 mm bore), and the monolithic bolt handle is made of steel, equipped with M8 bolt knob. The piston has an aeronautical grade aluminium body and head, a steel piston end, and a 70° synthetic rubber piston cup. The spring guide is made of fiber glass reinforced Nylon, it’s equipped with 2 dampening orings. The bolt dust cover is perforated, and the red piston is acting as a priming indicator.   The piston sear is made of steel, and the aluminium trigger is adjustable in preload. The trigger housing is made of fiber glass reinforced Nylon. The piston sear height can be adjusted by moving the trigger box forward or backward. The steel safety is ambidextrous.   Outer barrel (CNC, aeronautical grade aluminium) has a bull profile, and it’s threaded (M24x1 thread, compatible with DTSS silencers). Inner barrel is stabilized by 3 barrel spacers. Inner barrel (6.05 x 420 mm, brass) and hop-up rubber (silicone 60°) are of AEG type.   The two-way CNC aluminium hop-up unit, directly attached to the quick-change barrel assembly, is allowing barrel switch in seconds while keeping your hop up setting. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel. Hop-up can alternatively be used with two larger setting screws at the cost of quick-change keeping hop setting ability.   Stock and butt pad extensions (two included) are made of fiberglass reinforced Nylon.   Lightweight polymer magazine has a 25 rounds capacity (60 grams). This magazine introduces a new screw-less design, allowing quick tool-less disassembly for cleaning.   No zinc alloy, all screws are in 10.9 steel.   Colors available: Black/FDE/OD. Minimum length: 691 mm. Mass without magazine: 2.240 Kg.   Black: SBA-BLT-14BK FDE: SBA-BLT-14FDE OD: SBA-BLT-14OD   DESERT TECH LICENSED PRODUCT

The Silverback HTI is our licensed version of the Desert Tech Hard Target Interdiction bullpup sniper rifle, in its .50 BMG configuration.   The HTI monolithic receiver is the largest piece of CNC in the airsoft industry. This massive piece of 2 Kg, made of aeronautical grade aluminium, by CNC, features the patented barrel mount by Desert Tech, that strongly clamps onto the barrel and firmly secure it. Each receiver has a unique engraved serial number. The handguard (CNC, aeronautical grade aluminium) is using Desert Tech rail attachment system.   The outer barrel (CNC, aeronautical grade aluminium) is deeply fluted and equipped with a massive .50 BMG muzzle brake (SBA-FHD-05). The barrel is threaded (M25X1.5), and can receive the Elite Iron Alpha .50 Silencer, or the M14x1 CCW adapter.   Inner barrel (6.05 x 730 mm, brass) and hop-up rubber (silicone 60°) are of AEG type.   The two-way CNC aluminium hop-up unit, directly attached to the quick-change barrel assembly, is allowing barrel switch in seconds while keeping your hop up setting. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel. Hop-up can alternatively be used with two larger setting screws at the cost of quick-change keeping hop setting ability.   The HTI bolt has the largest volume of air and the largest springs in the airsoft industry. Stock spring type and muzzle energy may differ from one country to another, please check directly with your retailer. The 30 mm bore of this massive cylinder delivers 71 cc of air, allowing the use of very long inner barrels without negative effect from the cylinder/inner barrel ratio. The QD spring guide features a huge thrust bearing and a POM guide for a smooth and silent priming movement. The piston is made of steel and aluminium, with a synthetic rubber piston cup. The bolt dust cover is perforated, and the red piston is acting as a priming indicator. The bolt handle accepts M8 bolt knobs.   The HTI trigger is adjustable in position and pre-load. Piston and trigger sear are made by CNC out of stainless steel (90° system). The steel safety is ambidextrous.   Stock is made of fiberglass reinforced Nylon, and buttpad has a CNC aluminium grade frame covered with a large rubber damper.   Steel magazine has a 38 rounds capacity. This magazine introduces a new screw-less design, allowing quick tool-less disassembly for cleaning. The magazine can be used with a long/soft follower allowing users to fully empty the magazine.   The HTI is equipped with a replica of the patented Desert Tech monopod.   No zinc alloy, all screws are in 10.9 steel.   Colours available: Black/FDE. Length: 1125 mm. Weight: 6.100 Kg (with magazine).   Black: SBA-BLT-20BK FDE: SBA-BLT-20FDE   DESERT TECH LICENSED PRODUCT

General:

• Size: 110 cm minimum
• Minimum weight:  2.8kg
• Kg (with magazine)
•  Fully ambidextrous design (bolt handle, magcatch, safety, cheekpad adjustment, hop-up adjustment)

Receiver:

• 6000 series CNC Aluminium receiver with unique serial number
• POM sliding rings
• High Picatinny rail for mask users

Barrel:

• Tapered Aluminium outer barrel
• Barrel length: 510 mm, 6.05 brass AEG type
• Quick change barrel (bayonet lock + clamp into the receiver)
• M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
• 3 barrels spacers

  Magazine / feeding system:

• Magazine capacity: 48 bbs
• Feeding ramp buffer capacity: 20 bbs
• Quick release button inside the magwell to empty the feeding tube.
• Steel magcatch, AK style.

Bolt:

• Bolt usable volume: 41 cc
• Stainless steel cylinder with PVD coating (Aluminium Titanium Nitride Physical Vapor Deposition)
• Stainless steel cylinder head (removable with the tool integrated in cheek pad adjustment knob)
• SRS piston with specific 90° piston end (steel)
• Stainless steel spring guide with thrust bearing
• APS 13 mm spring compatible (75 Newton stock spring,  initial muzzle energy around 1.5J, with 0.2g bbs, minimum hop up setting), Warning: Not compatible with  SBA-SPR-08 (95 Newton spring).
• Quick change bolt
• 474 grams

Trigger group:

• Stainless steel piston sear
• Stainless steel spring guide stopper
• Stainless steel trigger box
• Steel safety
• 90° piston sear sliding on 2 ball bearings
• Preload adjustment
• Dual stage adjustment

Hop-up:

• CNC Aluminium body
• TDC design, can be used no matter the scope used.
• 50 indexed positions (by 15 µm increment)
• AEG hop-up rubber compatible
• 60° hopup rubber AEG
• anti double-feed system

Stock:

• Fiberglass reinforced Nylon construction
• Quick cheek pad adjustment
• Stock length adjustment: 0/+1/+2/+3 cm out of the box, +4/+5/+6 with optional parts.
• Stainless steel tripod attachment
• 5 MLOK slots on each side
• 2 MLOK slots under
• 4 QD points for slings (front/back on each side)

  Available in 4 colours:

• Black stock: SBA-BLT-30BK
• FDE stock: SBA-BLT-30FDE
• Green stock: SBA-BLT-30OD
• Wolf Grey stock: SBA-BLT-30WG

SRS Magazine Pouch Can hold two magazines. MOLLE attachment Cordura 600D ref:

• SBA-PCH-02BK
• SBA-PCH-02FDE
• SBA-PCH-02OD

TAC-41 A, bolt action rifle, Aluminium chassis with foldable stock. General:

• Minimum folded length : 68cm
• Minimum unfolded length : 92cm
• Maximum unfolded length: 102cm
• Minimum weight:  2.8 Kg (with magazine)
•  Fully ambidextrous design (bolt handle, magcatch, safety, cheekpad adjustment, hop-up adjustment)

  Stock:

•  Full metal chassis (6000 Series aluminium stock and chassis, steel hinges),covered with fiberglass reinforced polymer components.
• Integrated ARCA rail
• 4 MLOK slots on each side
• 3 MLOK slots under
• 2 MLOK slots under the folding stock
• Ambidextrous trigger finger activated safety ( in addition to the original thumb safety)
• Compatible with AR15 type grip (RS/GBB)
• Quick cheek pad vertical and horizontal adjustment
• Quick buttpad vertical adjustment
• Quick stock length adjustment: 10cm
• 6 QD points for slings (front/back on each side)

Receiver:

• 6000 series CNC Aluminium receiver with unique serial number
• POM sliding rings
• High Picatinny rail for mask users

Barrel:

• Tapered Aluminium outer barrel
• Barrel length: 330 mm, 6.05 brass AEG type
• Quick change barrel (bayonet lock + clamp into the receiver)
• M24x1 threaded outer barrel (compatible with any M24 x1 muzzle device)
• 3 barrels spacers

Magazine / feeding system:

• Magazine capacity: 110 bbs
• Feeding ramp buffer capacity: 20 bbs
• Quick release button inside the magwell to empty the feeding tube.
• Steel magcatch, AK style.

Bolt:

• Bolt usable volume: 41 cc
• Stainless steel cylinder with PVD coating (Aluminium Titanium Nitride Physical Vapor Deposition)
• Stainless steel cylinder head (removable with the tool integrated in cheek pad adjustment knob)
• SRS piston with specific 90° piston end (steel)
• Stainless steel spring guide with thrust bearing
• APS 13 mm spring compatible (90 Newton stock spring,  initial muzzle energy around 1.5J, with 0.2g bbs, minimum hop up setting), Warning: Not compatible with  SBA-SPR-08 (95 Newton spring).
• Quick change bolt
• 474 grams

Trigger group:

• Stainless steel piston sear
• Stainless steel spring guide stopper
• Stainless steel trigger box
• Steel safety
• 90° piston sear sliding on 2 ball bearings
• Preload adjustment
• Dual stage adjustment

Hop-up:

• CNC Aluminium body
• TDC design, can be used no matter the scope used.
• 50 indexed positions (by 15 µm increment)
• AEG hop-up rubber compatible
• 60° hopup rubber AEG
• anti double-feed system

Available in 4 colors:

• Black stock: SBA-BLT-31BK
• FDE stock: SBA-BLT-31FDE
• Green stock: SBA-BLT-31OD

The Silverback MDR-X  MICRON is our airsoft licensed version of its real steel 5.56 counterpart, manufactured by Desert Tech LLC.

Very realistic in its conception, to mimic the original build and features as much as possible while integrating a high-quality gearbox, able to deliver high performance from DMR to CQB applications.  

Realistic construction and assembly

• Made under exclusive license from Desert Tech LLC

• Fully engraved markings with unique serial number.

• 6000 series aluminium receiver/outer barrel and muzzle brake.

• PA6 Nylon, fiberglass reinforced stock, grip and handguard, synthetic rubber buttpad.

• MLOK handguard, with 2 slots at 3 and 9 o’clock.

• 2 steel QD attachments at the rear of the stock.

• Ambidextrous fire selector and 3 points magazine release.

High quality Gearbox

• CNC aluminium wide bore cylinder (26mm diameter, +19% wider than standard AEG), including a spring quick change design.

• Useful volume 22.5 cc ( with stock ventilated 75% cylinder)

• CNC aluminium cylinder head, NBR piston damper, stainless steel nozzle.

• CNC aluminium ventilated piston head, FKM o-ring, POM glider ring.

• CNC stainless steel & aluminium spring guide, equipped with a thrust bearing. 3 lugs design ensuring a better axial alignment.

• “Tappet plate-less” construction.

• CNC aluminium piston body, hardened MIM steel 16 teeth rack.

• 18:1 torque up gear set, hardened MIM steel.

• ADC 12 aluminium gearbox carter, 10mm ball bearing.

• Neodymium high-torque motor 19000RPM (11.1V), short axis.

 

Programable Electronic Control Unit (ECU)

• Designed to operate on 11.1V and 7.4V Li-Po batteries.

• Electronic Trigger Unit (ETU), programable Electronic Control Unit (ECU) developed in cooperation with T238 ,

• Gear cycle and fire selector position detection by Hall Effect sensor.

• Programable shooting mode (burst/binary), DMR cooldown, ROF setting, pre-cocking, sleep mode, active braking and battery protection. It also features a mechanical blocking and mosfet temperature safety protection.

• Compatible with Brushless motors (with some limitations, please check the dedicated user manual)

Efficient hop-up design

• Hop-up unit made of durable Polycarbonate material.

• TCD, rotary ring design.

• Incremental “click” adjustments using a ball plungers, 36 positions ranging from 0 up to 750 µm with the low nub (installed, for standard bbs configuration), and from 500 up to 1250 µm with the high nub (provided, for heavy bbs configuration).

• 330 mm brass inner barrel. 6.05 mm bore, chemical passivation surface treatment, AEG hop-up cut.

• 70 degree flat hop bucking.

The MDRX is coming with:

• 120 rounds AR15/5.56 magazine (standard AR15 AEG magazine form factor)

• 4 pairs of spacers to adjust the magazine wobble depending on its thickness (PA6 nylon material)

• Two additional power spring (*).

• A pin puncher for easy battery change and disassembly.

• Allen key 2mm and 5mm.

• One high nub for the hop up unit, to lift bbs from 0.32 grams and above (low nub installed out of the box).

• One extra ball plunger for the hop-up unit.

• Most Compact TAC-41 Variant
• PA6 Nylon, Glass Fibre Reinforced Polymer Receiver & Chassis
• Picatinny 1913 Stock Mounting Hub
• Intuitive & Tactile Hop-Up Adjustment (Polycarbonate Material for Sports Version)
• 48 Round Capacity
• AEG Spec Hop-Up Bucking & Inner Barrel
• Adaptable Ambidextrous Design
• Free Float Barrel Assembly
• 24mm CW Muzzle Threads
• Comes with Buffer Tube Stock
• Reinforced Nylon Polymer Stock and Buffer Tube Assembly (Milspec)
• Steel QD Points on Both SidesWith the success of the TAC 41 series, this is one of the latest and an even more compact versions of the TAC 41 A. The Silverback TAC-41 LS (Lite Sport) is the much lighter brother of the TAC 41, which focuses on being lightweight and has a much more compact form factor, sporting a shorter barrel with a 330mm inner barrel and a fiberglass-reinforced nylon polymer construction for both the receiver and chassis, with the chassis utilizing a 1913 Picatinny stock mounting hub which allows for a more modular stock setup.Internally, this rifle performs almost the same as its premium counterpart. The trigger is adjustable and is tactile to the touch, while the trigger group is made to be incredibly robust, as the components are made using stainless steel. The bolt action is very smooth, as one would expect from a Silverback Airsoft sniper system. The bolt is CNC machined using high-quality 6061 T6 aluminum and is topped off with a smooth anodized finish. The bolt cylinder is easy to disassemble for routine maintenance, making it very user-friendly. More importantly, the air volume of the cylinder is the same as the bigger Silverback SRS A2 series, meaning that you get an incredibly large volume of air for every shot taken (41cc). This translates to more consistent shots, highly stable power output, and overall less wastage per shot. Pair these with a free float barrel assembly and a redesigned hop-up unit that is highly precise, tactile, and intuitive to adjust on the fly, and this sniper platform is capable of achieving pinpoint accuracy when delivering shots downrange. The barrel is outfitted with a 24mm CW thread and is compatible out of the box with Silverback suppressor units.The hop-up unit (polycarbonate material for Sports version) uses the same TDC adjustment design with 50 index positions for precise tuning with all BB weights, and the hop-up bucking is an AEG spec 60-degree rubber, making it highly customizable with other brands of AEG buckings on the market. The rifle has an impressive 48-round magazine, which works in tandem with the unique feed ramp design of the TAC-41 that captures all BB that are pre-loaded and will not drop BBs out when removing the magazine unless the feed-ramp release button is pressed, making this design extremely efficient and clean.This particular package includes the Silverback 1913 Picatinny buffer tube stock assembly, which is made using the same durable fiberglass-reinforced nylon polymer material as the chassis. This maintains a balanced yet lightweight overall setup while giving the user the ability to use standard M4-style stocks. The buffer tube is Mil-Spec dimensions for optimal stock compatibility and features 2 steel QD points on both sides.

• Most Compact TAC-41 Variant
• Lightweight Sports Version
• PA6 Nylon, Glass Fibre Reinforced Polymer Receiver & Chassis
• Picatinny 1913 Stock Mounting Hub
• Intuitive & Tactile Hop-Up Adjustment (polycarbonate material for Sports version)
• 48 Round Capacity
• AEG Spec Hop-Up Bucking & Inner Barrel
• Adaptable Ambidextrous Design
• Free Float Barrel Assembly
• 24mm CW Muzzle Threads
• Comes with Precision Focused Marksman Aluminium Stock with Fibreglass Reinforced Nylon Furniture
• NBR Buttpad
• Steel QD Points on Both Sides
• 2 MLOK Slots Under the Stock (For Monopod)
• Adjustable Stock Length, Butt Pad Height, Cheek Rest Position & Height

With the success of the TAC 41 series, this is one of the latest and an even more compact versions of the TAC 41 A. The Silverback TAC-41 LS (Lite Sport) is the much lighter brother of the TAC 41L, which focuses on being lightweight and has a much more compact form factor, sporting a shorter barrel with a 330mm inner barrel and a fiberglass-reinforced nylon polymer construction for both the receiver and chassis, with the chassis utilizing a 1913 Picatinny stock mounting hub which allows for a more modular stock setup.Internally, this rifle performs almost the same as its premium counterpart. The trigger is adjustable and is tactile to the touch, while the trigger group is made to be incredibly robust, as the components are made using stainless steel. The bolt action is very smooth, as one would expect from a Silverback Airsoft sniper system. The bolt is CNC machined using high-quality 6061 T6 aluminium and is topped off with a smooth anodised finish. The bolt cylinder is easy to disassemble for routine maintenance, making it very user-friendly. More importantly, the air volume of the cylinder is the same as the bigger Silverback SRS A2 series, meaning that you get an incredibly large volume of air for every shot taken (41cc). This translates to more consistent shots, highly stable power output, and overall less wastage per shot. Pair these with a free float barrel assembly and a redesigned hop-up unit that is highly precise, tactile, and intuitive to adjust on the fly, and this sniper platform is capable of achieving pinpoint accuracy when delivering shots downrange. The barrel is outfitted with a 24mm CW thread and is compatible out of the box with Silverback suppressor units.The hop-up (polycarbonate material for Sports version) unit uses the same TDC adjustment design with 50 index positions for precise tuning with all BB weights, and the hop-up bucking is an AEG spec 60-degree rubber, making it highly customizable with other brands of AEG buckings on the market. The rifle has an impressive 48-round magazine, which works in tandem with the unique feed ramp design of the TAC-41 that captures all BB that are pre-loaded and will not drop BBs out when removing the magazine unless the feed-ramp release button is pressed, making this design extremely efficient and clean.This particular package includes the Silverback 1913 Picatinny Aluminium Stock attachment, which features a CNC-machined aluminium core construction and is outfitted with the same nylon polymer furniture blend as the chassis. For comfort and function, it is also outfitted with an NBR buttpad, 2 QD sling slots on both sides of the stock, and adjustable length & height, & cheek rest height.Includes:

• x1 TAC 41 Rifle (Sports)
• x1 Aluminum Stock
• x1 M120 Spring
• x1 Manual

Hard Shell Pouch for .338 mags (SRS, TAC-41 Long, VKS) Single magazine “Taco” style pouch Hard Shell Pouch for .338 mags MOLLE attachment TPU and Pa6 nylon materials it can accommodate SRS,  TAC41 (110 rds) and VKS magazines