AEG Magazines

PTS EPM1 RX  250 round MidCap Magazine - Black The EPM1-RX is a slight revision of the venerable but still industry-leading PTS EPM1 250 round midcap magazine. The primary revision is brand new tooling for the internal shell which leads to more precise dimensions and smoother bb channel.  The EPM1-RX internal shell is distinguished by Its grey color and EPM1-RX markings on its surface. The EPM1-RX retains all the same features and technologies of the original EPM1: Capacity: 250round BBs capacity and its legendary feeding consistency and reliability. Dupont Zytel Polymer Shell: This extremely rugged polymer capable to withstanding considerable rough field use and abuse. Angled Basepad: Made from the same rugged Dupont Zytel polymer as the magazine body, the angled flat bottom of the basepad allows you to rest the gun on any flat shooting surface for greater shooting stability.  The small and unobtrusive front lip ensures correct indexing of the magazine and aids in drawing the magazine out of a magazine pouch. Base Dot Matrix Pattern: This feature allows for personalized magazine marking with a marker or paint pen for ownership identification, magazine load distinction, etc. A Wide Range of Compatibility: The EPM1-RX is compatible with Version 2 based M4 AEGs by TM, KWA, PTS PDR-C, PTS ERG series, PTS Masada, G&P, the VFC 416, the CA 416, AMOEBA AM Variants, and many more. Continuous Mag Well Guide: This design reduces snagging when drawing from or inserting into pouches or the rifle mag well. Signature EP Texture: The magazine features a positive texture for better grip and tactile feel. The texture along the spines allows the EPM1-RX to be compatible with the Magpul Maglink® Coupler. Enhanced magazine follower: The result of our design collaboration with Deranged Designs, this follower greatly improves the BB feeding speed and consistency and completely prevents BBs from sliding past the follower and creating a jam. The Fuel Gauge window: The unique orange mag level indicator lets you immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, the mag level indicator will show at the top of the window. As you fire the BBs out of the EPM1-RX, the orange indicator will travel down the window until it reaches the bottom, indicating that the magazine is empty.

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS? Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:
The EPM1 is the First collaborative development between PTS and Odin Innovations
The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag
The EPM1 is the First AEG magazine with a Fuel Gauge window to indicate full or remaining bb load
The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Externally, the EPM1 has also been updated significantly.  As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel? polymer which makes it extremely durable and strong.  Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well.  Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel.  The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink? Coupler.  

The baseplate of the EPM1 has also been completely redesigned.  The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped.  It is also significantly slimmer than the first generation EPM's so stacking the magazines in pouches or during storage takes up less space than before.  The basepad's heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use.  The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1's main body.

The new enhanced magazine follower is the result of our design collaboration with Deranged Designs.  The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.
The most significant and innovative external feature of the EPM1 is the Fuel Gauge window.  With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb's out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.

Features:

• Dupont Zytel? polymer shell
• 170 BBs capacity
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specification:

• Colour  Black
• Material  Dupont? Zytel High Performance Reinforced Polymer
• Dimension   140 x 72 x 26mm
• Weight  160g approx.
• Capacity 170 rounds
• Compatibility V
  • Tokyo Marui Style AR-15 AEG Airsoft
  • G&P AR-15 AEG Airsoft
  • KWA AR-15 AEG & ERG Airsoft
  • PTS ERG AR-15 Airsoft
  • PTS Masada AEG
  • PTS PDR-C AEG
  • VFC AR-15 & HK416 AEG Airsoft
  • CA AR-15 & 416 AEG Airsoft
  • AMOEBA AM Variants AEG Airsoft

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS? Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:
The EPM1 is the First collaborative development between PTS and Odin Innovations
The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag
The EPM1 is the First AEG magazine with a Fuel Gauge window to indicate full or remaining bb load
The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Externally, the EPM1 has also been updated significantly.  As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel? polymer which makes it extremely durable and strong.  Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well.  Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel.  The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink? Coupler.  

The baseplate of the EPM1 has also been completely redesigned.  The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped.  It is also significantly slimmer than the first generation EPM's so stacking the magazines in pouches or during storage takes up less space than before.  The basepad's heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use.  The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1's main body.

The new enhanced magazine follower is the result of our design collaboration with Deranged Designs.  The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.
The most significant and innovative external feature of the EPM1 is the Fuel Gauge window.  With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb's out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.

Features:

• Dupont Zytel? polymer shell
• 170 BBs capacity
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specification:

• Colour  Dark Earth
• Material  Dupont? Zytel High Performance Reinforced Polymer
• Dimension   140 x 72 x 26mm
• Weight  160g approx.
• Capacity 170 rounds
• Compatibility V
  • Tokyo Marui Style AR-15 AEG Airsoft
  • G&P AR-15 AEG Airsoft
  • KWA AR-15 AEG & ERG Airsoft
  • PTS ERG AR-15 Airsoft
  • PTS Masada AEG
  • PTS PDR-C AEG
  • VFC AR-15 & HK416 AEG Airsoft
  • CA AR-15 & 416 AEG Airsoft
  • AMOEBA AM Variants AEG Airsoft

Jing Gong M4 / M16 450 round high cap metal magazine. Fits most brands including JG, Cyma, Dytac, Specna arms, Bolt, Ares, classic army and more. Not guaranteed to fit all brands.

E&C 160 round M4 / M16 metal mid cap Tan   Standard Stanag style mid capacity magazine for M4/M16 AEGs. These are the top-loaded mid-capacity magazines and hold 160 rounds which is great compared to most mid-caps on the market. Features: - Sheet metal outer case - Plastic internal - Double stack - Holds 160 rounds - Loaded with a speedloader This standard Stanag style magazine for Airsoft AEGs that can hold up to 160 rounds instead of the normal 120 rounds from most branded mid caps. They are loaded in the top with a speedloader. These fit most brand AEGs, but with mid caps there can be some compatibility issues, however we have tested the E&C magazines in various brands and they fed in each one. The Stanag design means it will fit in the magwell of most M4/M16 rifles better than PMAG, Hexmag etc.

E&C 300 round M4 / M16 High cap Tan   High capacity winding magazine for M4/M16 series AEG. Metal case with plastic internals and holds 300 rounds. Features: - Metal outer casing - Holds 300 rounds - Stanag style - Colour: Black Sheet steel outer casing with durable plastic internals. The high capacity magazines are filled through a hatch in the top and you wind the wheel on the bottom to bring the BBs up to the feeding tube. One full wind of the magazine should give the mag enough tension to feed all of the BBs without having to wind again, however, there may be some left over that can't feed up. It fits most brands cloned from Tokyo Marui, but may be some tolerance issues in some magwells.

E&C SR25 Magazine 130 round Mid Cap

Description:
The PTS EPM-G AEG for G36 AEG rifles features a constant-curve internal geometry for reliable feeding. It utilizes the same internal components as the former PTS PMAG M Version, and proprietary high strength polymer to ensure durability and performance in all environments. The magazine is available in Black.
 
Specification:

• Colour  Black
• Material Dupont? Zytel High Performance Reinforced Polymer
• Dimension  190 x 75 x 25mm
• Weight - 195g approx.
• Capacity -  120rds
• Compatibility - Tokyo Marui, Classic Army, JG, SRC, Umarex, Echo1 and other G36, XM8, SL9, SL8 and compatible G36 series Airsoft AEG.

E&C P Mag Style High Cap M4 Magazine - Tan

300 round lightweight and durable 300 round magazine to fit most known brands of M4 / M16 / Scar-L and other 5.56 compatible airsoft guns

JG AUG High Cap Magazine – 330 Rounds

Spare and replacement magazines that will fit most popular brands.